User manual CLATRONIC RG 2892 NEW

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. Do not use it outdoors (except if it is designed to be used outdoors). [. . . ] Make the appliance work for about 5 minutes without any food in it to remove the protective coating (see Using the Appliance). Clean the pans and the baking plate in a rinsing bath once they have cooled down. The left-hand lamp goes on to signal that the device is connected to the mains power supply. Turn on the machine by moving the regulator clockwise to the desired position. The device has reached the correct temperature when the right-hand control lamp goes off. During operation the control lamp goes on from time to time to show that the correct temperature is being maintained. In the pans you can put for example mushrooms or small slices of bread with cheese to cook. To avoid damaging the non-stick coating, remove the food with a wood spatula. To switch the device off, first turn the temperature regulator to OFF and remove the plug from the socket. 30 Always pull the plug out of the mains socket and wait until the unit has cooled down before cleaning the unit. Under no circumstances should the device be immersed in water for cleaning Clean the pan and stone slab in the usual manner in soapy water. Please remove any food residues while they are still warm with a damp cloth or paper towel. Wash off the coating with a soft sponge and soapy water, then rinse with clear water and dry thoroughly with a soft cloth. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]