User manual CLATRONIC PP 2914 NEW

[. . . ] Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead). [. . . ] In order to ensure your children`s safety, please keep all packaging (plastic bags, boxes, polystyrene etc. 1 2 3 4 5 6 Glass lid with heat-insulated plastic knob Contacts for the thermostat Socket for the thermostat Housing cover Handle Hot plate 7 8 Thermostat Temperature sensor - measures the temperature of the plate 9 Mains lead 10 Mains plug 11 Thermostat control Please ensure that the temperature regulator (11) is turned to OFF and insert it into the socket (3) of the thermostat. If the thermostat (7) is not inserted correctly, this may lead to abnormal heating, of which the consequence may be damage or accidents. You should therefore ensure that the thermostat is inserted correctly. Set the temperature control (11) according to what you intend to do: Adjustment Temerature adjustment in °C approx. Keeping warm Fried food, hamburgers Pancakes, scrambled eggs, ham, bacon Pizza The device has reached the correct temperature when the control lamp on the thermostat (7) goes off. During operation the control lamp goes on from time to time to show that the correct temperature is being maintained. Using the unit The Party Pan should be preheated for approximately five minutes. The cooking time depends on the type and quantity of food that is to be cooked as well as the degree of cooking. When turning the food that is being cooked, please use wooden or Teflon utensils so as not to damage the non-stick layer. When cooking is finished the food may be kept warm by turning the controls to MIN. To switch the device off, first turn the temperature regulator to OFF and remove the plug from the socket. Do not remove the thermostat from the device until the device has cooled down, as the temperature sensor is still very hot after use. Always pull out the plug from the mains socket before cleaning and wait until the unit has cooled down. Please remove any food residues while they are still warm with a damp cloth or paper towel. In the case of stubborn residues the pan should be reheated with a little water. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]