User manual CLATRONIC MRC 554 NEW

[. . . ] To avoid the risk of fire or an electric shock, you should not expose the device to rain or moisture. Consequently, do not use the device in the immediate vicinity of water - for example near a bath tub, a swimming pool or in a damp cellar. When using external mains supply, pay attention to the correct polarity and voltage. [. . . ] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Time setting function key (TIME) Alarm function key (ALARM) Wake-up interval (SNOOZE) Function key for delayed switch-off (SLEEP) Hour function key (HOUR) Set minutes (MIN) Function switch (AUTO/OFF/ON) LED for activated alarm function (AUTO) BUZZ/VOLUME regulator TUNING regulator Station scale LED Throw-out antenna Battery compartment Insert the plug into a properly installed 230 V, 50 Hz power socket. Setting of the Clock (24 h) Hours: Minutes: Press the TIME key (1) and the HOUR key (5) simultaneously. Setting of the Alarm (24 h) Hours: Minutes: Press the ALARM key (2) and the HOUR key (5) simultaneously. Once the alarm times are set and a radio station has been selected, shift the function selector (7) to "AUTO". If you would not like to be woken up by the radio, turn the volume control (9) to the BUZZ position (buzzer) until it locks in place. Instead of the radio, the buzzer goes off when the alarm time is reached. To turn off the alarm, push the function switch (7) to the OFF position or press the ALARM button (2). Automatic Alarm Interval The automatically set alarm function can be shut off for approximately 9 minutes with the SNOOZE key (3). After approximately 2 hours the alarm function switches off completely until the following day. Delayed Shut-Off The delayed switch-off function can be used when the switch is in the positions AUTO or OFF. When the SLEEP button (4) is pressed the radio is switched off after 59 minutes or 1 hour and 59 minutes. the switch-off time can be adjusted by pressing the SLEEP and the HOUR button (5) or the MIN button (6) at the same time. (not supplied) If there is a power cut or the mains plug has been removed from the power socket, the settings will be retained if the power reserve batteries are inserted. If the device is not used for a prolonged period of time, please take the batteries out in order to prevent leakage of battery acid. Please return used batteries to the relevant collection points or the shop where they were bought. Clean the appliance with a slightly humid cloth without any additives. [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]