User manual CLATRONIC MRC 529 NEW

[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. [. . . ] However, disturbances may occur owing to the local reception position. Buildings with tall metal elements and the vicinity of TV sets, PCs, cell phones, etc. If the automatic setting is still not possible after 10 minutes despite the alignment of the incorporated antenna, the reception position is too bad. Using buttons 10 and 11, first set the month and then, after you have pressed the SET button, the day. Use buttons 10 and 11 to set the hours first and then, after you have pressed the SET button again, the minutes. Display Mode It is possible to show various information, such as the seconds, the date and day of the week in the display (in the time mode). When the >-< button is pressed (10), the seconds appear; pressing the >+< button (11) brings up the weekday. In FM mode you can improve reception by using the extensible antenna (16). To direct this antenna, turn the radio or choose a different position to improve the quality of reception. â· First press the MODE button (3) and then the SET button for approx. A dot appears in the display (5) next to "AL1" (14) and the alarm time appears with the hours flashing. Use buttons 10 and 11 to set the hours first and then, after you have pressed the SET button, the minutes. Press the SET button again in order to select the days on which you would like to be woken up at the set time. Using buttons 10 or 11 you can set the following periods: 1 - 5 = Monday - Friday, 1 - 6 = Monday - Saturday, 1 - 7 = Monday - Sunday and 6 - 7 = Saturday - Sunday. If you press the SET button again you will leave the adjustment mode or after a few seconds the time automatically appears in the display. In order to deactivate the alarm times, press the MODE button once (AL1) or twice (AL 2) and then the >+< button. Once the alarm times are set and a radio station has been selected, shift the function selector (8) to "AUTO". If you would not like to be woken up by the radio, turn the function switch (8) to the BUZZ possession. Instead of the radio, the buzzer goes off when the alarm time is reached. To turn off the alarm for 24 hours, either press the SET, >-<, >+< or the MODE button. [. . . ] For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]