User manual CLATRONIC MC 1014 CD NEW

[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. [. . . ] Reverse side not shown 27 Loudspeaker connections 28 Power supply 29 FM Throw-out antenna Remote Control not shown 1 I CD SKIP button (ahead) 2I CD SKIP button (back) 3 STOP button 4 PLAY/PAUSE button Ensure correct polarity (see the floor of the battery compartment or the imprint on the outside). Warning: batteries are not to be disposed of together with domestic wastes. Dispose of the used batteries at the relevant collection bin or at your dealer's. Insert the plug of a set of headphones into the headphone socket ­ the loudspeakers are "muted". The FM/ST control lamp (22) only lights up when you have selected FM stereo and the station is being received in stereo quality. If reception is too weak and there is noise on the station being received, this lamp will flicker. Try to improve reception by turning and bending or twisting and altering the length of the antenna. In this frequency band programs are transmitted in "mono" only. Lightly press an audio CD with the printed side facing upwards on to the central cone and then close the CD compartment lid (10). After a few seconds the total number of songs/tracks is shown in the display (19). To remove a CD, press the STOP key, open the CD deck with the PUSH/OPEN key (11) and take out the CD carefully. description of the CD buttons: PLAY/PAUSE (2): SKIP/SEARCH (4/5): the sound can be interrupted briefly. The PLAY/PAUSE control lamp (23) flashes Using this button you can jump to the next or previous title. If the button is kept pressed down, the machine 31 Starts to search through the tracks. Press once (the REPEAT LED (21) flashes): the current track is repeated continuously. Press a second time (the REPEAT LED emits a fixed light): the whole CD is played continuously. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]