User manual CLATRONIC MC 1004 CD NEW

[. . . ] The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened. Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light. 12 Please read the operating instructions carefully before using the machine for the first time. POWER button STOP button PLAY/PAUSE button FAST button (fast forward and rewind MP3) RESUME button REPEAT button RETURN button VOLUME up/down button SLOW button A-B repeat button SKIP up/down button PBC button OSD button L/R button (left/right channel) NTSC/PAL button (N/P) Programme button 1+ button 10+ button RANDOM button STEP surround button MUTE button Remove any transport safety equipment on the CD and cassette sections. [. . . ] When the STOP/EJECT button (28) is pressed again, the door of the cassette compartment opens. Insert an audiocassette with the side on which you wish to record facing forwards. Ensure that the cassette is not copy-protected (the copy protection tab on the top narrow side of the cassette must not have been removed). Select the source from which you wish to record with the function switch (13) and then start playback from this source if necessary. The sound source which you are listening to is the one from which the recording is made. The recording can be interrupted briefly by pressing the PAUSE button (29), or stopped with the STOP/EJECT button (28). Insert an audio CD with the printed side facing upwards onto the central cone and then close the lid of the CD compartment. Within a few seconds the total number of songs/tracks and the total playing time of the CD is shown in the display (9). The song currently being played and the playing time of each song is shown in the display. The desired volume can be set using the volume buttons (19 + 21, or button 8 on the remote control). EE EE I / IFF FF (2+3, or 11 on the remote control): Briefly pressing these buttons allows you to jump to the next or the previous track. Press three times: The function is deactivated and the CD is played in the normal mode. (16 on the remote control): This allows you to programme the tracks in any order. Below you will find an example of how to programme CD playback: Example: You would like to store tracks 4 and 12. - Track number 12: - Press the 10+ button once (18 on the remote control). in order to delete the programming , press the STOP button (8 , or 2 on the remote control). If your music centre is connected to your television by the video cable supplied you can also programme the CD playback of the music centre using the menu on the television screen. A-B (10 on the remote control): It is possible to hear a certain section of a song repeatedly. Press the A-B button on your remote control at the point where the section you would like to hear repeatedly begins. Press this button again when you have reached the point in the song where you would like to stop. If your music centre is connected to a television set, 16 The section of the song is now repeated continuously. If you would like to play one of these CDs, proceed as described under "Playing CDs". [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the warranty return the device in its original packing together with the proof of purchase to your dealer. *) Accessories are subject to the legally envisaged warranty obligation (6 months) and do not entitle to the free replacement of the entire device. In this case, only the faulty accessory will be sent in or ordered with the agreement of our customer service! [. . . ]