User manual CLATRONIC KM 2961 PC 2

[. . . ] Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead). To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appliance. [. . . ] During operation of the food processor bowl the safety cover (5) must be positioned on the mixer drive. Positioning the Mixing Bowl Please all parts before using for the first time (see , , Cleaning"). Ensure that the rotary switch is in the , , 0" position and that the mains lead is not in the socket. Place the mixing bowl (4) on the base of the machine so that the line on the mixing bowl is located approximately 4 cm to the left of the line on the base. Then turn the mixing bowl (4) clockwise until the two lines are positioned one above the other. The machine only works when the mixing bowl (4) is positioned on the motor housing. Connect the mains lead to a properly installed 230 V, 50 Hz safety power socket. â· For constant mixing (continuous mode): The rotating speed can be continuously adjusted from 1 to 9: Level 1 = low rpm Level 9 = high rpm Shift the selector to , , 0" to switch off the appliance. when the switch is released , it returns automatically to , , 0" position. In order to insert more food to be mixed the small lid may be removed. chopping up Ice Cubes The blade in the mixing vessel is also suitable for chopping up ice cubes. Mount the tool you wish to use by inserting the upper end into the opening provided on the arm (Pay attention to the corresponding coloured markings. Insert the mains plug into a properly installed 230V / 50 Hz safety power socket. Switch the machine using the level regulator to a speed between 1 and 9 (corresponding to the mixture). Always choose a utensil and a speed according to the following table: Product/Type of Max. With heavy mixtures, do not operate the machine for more than ten minutes, and then allow it to cool down for a further ten minutes. â· Depending on its constituency it may be necessary to remove the mixture from the sides of the mixing bowl and return it to the mixing mechanism. After kneading/stirring turn the switch (2) back to the , , 0" position as soon as the mixture has formed a ball. The mixture can now be released with the help of a spatula and removed from the mixing bowl. accessories: None of the accessories is suitable for cleaning in the dishwasher. [. . . ] If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt. *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]