User manual CLATRONIC HTD 2690 PROFI 2

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. [. . . ] Do not use the device without the cover and the filter on the suction intake!If the hair dryer is used in the bathroom, remove the mains plug after use as water represents a hazard. As additional protection we recommend the installation of a fault current protection device (RCD) with a rated current of not more than 30 mA in the wiring system of the bathroom. You can dry single hair locks by concentrating the flow of hot air with the hairdressing nozzle. The diffuser is the ideal solution to dry curly hair without losing volume. Only connect the machine to a properly installed safety socket, 230 V/50 Hz. Setting the Temperature Level (right switch): Position 1: cold air Position 2: medium temperature for gentle drying and shaping Position 3: high temperature for rapid drying Setting the desired blower strength (left switch): Position 0: OFF Position 1: gentle stream of air Position 2: strong stream of air COOL-Shot: With this switch it is possible to interrupt the heating process so that the air can be mixed according to individual requirements. Removing the air suction cover Remove the cover after turning the cap through approximately 30 degrees against a clockwise direction. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee! [. . . ] After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. Pozadovaný stupe ohevu vzduchu nastavíte takto (pravý spínac): Poloha 1: studený vzduch Poloha 2: stední teplota pro pozvolné susení a tvarování úcesu Poloha 3: vysoká teplota pro rychlé susení Pozadovaný stupe síly proudícího vzduchu nastavíte takto (levý spínac): Poloha 0: vypnuto Poloha 1: mírný proud vzduchu Poloha 2: silný proud vzduchu COOL-Shot: Pomocí tohoto ovládacího prvku perusíte ohev vzduchu. [. . . ]