User manual CLATRONIC HT 2845 2

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. [. . . ] Special safety instructions for this device Keep the device away from water and moisture such as, for example, bath tubs, shower areas or even persons taking a bath!If the hair dryer is used in the bathroom, remove the mains plug after use as water represents a hazard. Do not put objects, hair or your hands in front of the air intake opening! the device can suffer damage despite the overheating protection if the airflow is blocked!As additional protection we recommend the installation of a fault current protection device (RCD) with a rated current of not more than 30 mA in the wiring system of the bathroom. You can dry single hair locks by concentrating the flow of hot air with the hairdressing nozzle. Shift the switch on the handle to one of the desired heat/blowing levels: Level 0: off Level 1: medium airflow and medium temperature Level 2: strong airflow and high temperature 6. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!Without proof of purchase no free replacement or repair will be carried out. [. . . ] After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. Pepínac, který se nachází na rukojeti, nastavte do pozadované polohy pro ohev/foukání: Stupe 0: Vypnuto Stupe 1: Mírný proud vzduchu a mírná teplota Stupe 2: Silný proud vzduchu a vysoká teplota 6. [. . . ]