User manual CLATRONIC FST 545 2

[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. [. . . ] Using the adhesive strip, fix the IR transmitting diode in the immediate vicinity of the IR receiving diode of your source device. Insert the mains adapter into the socket and switch the device on using the on/off switch. Note: You can also use a PC with a sound/TV card which has an audio/video output as an audio/video source. For the audio connection from the PC to the video transmitter please use the audio adapter with the 3. It is not possible to receive signals from the devices connected before that to the FST transmitter!In order to prevent interference only the device selected as the source should be switched on, e. Use the 3-pole AV cinch lead to connect the receiver to the scart or video input of the television (please follow the colour markings). For the scart input please use the scart adapter marked "Receiver" and make a direct connection to the television set. Insert the mains adapter into an easily accessible socket and switch the receiver on. ensure that the transmitter and receiver are set to the same channel (1/2/3/4). Fold out the receiving antenna and turn the receiver and transmitter until you receive a perfect picture. Changing the channel setting may also be necessary in cases where reception is not perfect. Turn the transmitter and receiver again so that they face one another. Poor reception may result from interference from other radio-transmitting devices such as cordless or mobile telephones or CB radio. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]