User manual CLATRONIC DVD 658 HC PROGRAMMING

[. . . ] In order to prevent the device from malfunctioning and to protech against electric shocks, fire or injury, please note the following: · Always remove the plug by pulling the plug itself and not the lead. ⷠNever try to repair or replace the mains lead yourself. In direct sunshine, where there is exposure to heaters or in closed vehicles. Otherwise internal parts may be seriously damages When the device is not being used: Please turn the device off when it is not being used. [. . . ] Press PLAY button to resume playback from the location where playback is stopped. Use the / buttons to select the desire music folder, then press ENTER. NOTE: Press STOP button, then press REPEAT button in remote control to play a TRACK REPEAT(Repeat one song), FOLDER REPEAT, and DISC REPEAT. For example, you may have photographic film developed with pictures stored in JPEG format. Some useful features are described below: · When you insert a disc with JPEG files, the files or pictures available for playback will be listed on the screen. ⷠWhenplaying picture CD disc, press STOP button, the file or pictures available for playback will be listed on or SKIP the screen, and press SKIP move to the next page. After you open one JEPG file, each subsequent file will appear automatically for a few seconds. To keep the JEPG image on the screen longer, press PAUSE button to pause the image. An On Screen Display (OSD) indicator will be displayed at the upper part of the TV screen when certain functions are executed, or when pressing the DISPLAY button on the remote control. the OSD indicator is a user friendly interface designed to display the status of playback type. When a different disc is loaded (DVD, CD, VCD, MP3), the OSD indicator bar will be different. the OSD bar will appear automatically if it is activated by pressing the DISPLAY button. Repeat track Repeat disc Repeat off To program play a disc in a desired sequence In stop mode, Press PRGM button to enter the program menu Track folder disc off A DVD disc may contains up to 32 selectable subtitles: While playback a DVD disc Press AUDIO button repeatedly to select the desired audio sound track. In DVD mode When the program menu appears, input the Title number, press ENTER Then input the Chapter number, press ENTER button. (CLEAR) ­ Press CLEAR button if you want to cancel the wrong information you input before or cancel the desired track. (CLEAR) ­ Press CLEAR button if you want to cancel the wrong information you input before or cancel the desired track. NOTE Some DVD disc do not allow program setting Single track disc cannot be programmed MP3 disc cannot be programmed Press the ZOOM button again return to normal picture mode NOTE The picture quality is degraded as the picture is increased. For FM Stereo reception The unit provides FM MONO/STEREO selector in stereo mode, the unit will automatically switch to sterero when an FM stereo broadcast is received " turn on in the display. NOTE Do not move any bar to select item, please make sure the mode is in stop mode. To terminate auto turning, press the tuning +/­ button again on the remote control. Once they are preset, broadcasting corresponded to these can readily be enjoyed by simply pressing the preset station button. Press ENTER to confirm the selection Press SETUP button to quit ADJUST TV SCREEN VIEWABLE FORMAT 4:3LB (Letter Box) 4:3PS (Pan Scan) 16:9 (Wide screen) Press ENTER to confirm the selection Press SETUP button to quit TV TYPE Default setting TV SYSTEM SUBTITLE 4:3PS NOTE When select the wrong video out, the TV SCREEN may blank. [. . . ] Do not try to close the door if the CD has not been correctly inserted into the CD compartment. On some DVDs there are scenes that have been recorded simultaneously from a number of different viewing angles (the same scene from the front, the left, the right etc. With such DVDs the ANGLE button can be pressed to see the scene from the various angles. Specific sections of the video presentation can be quickly found using these numbers. [. . . ]