User manual CLATRONIC DVD 657 NEW

[. . . ] Before attempting to connect, operate or adjust this player, please read these instructions completely. (Back of player) The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Dear Customers, may we take this opportunity to thank you for purchasing this DVD/VCD/CD player. We strongly recommend that you carefully study the Operating Instructions before attempting to operate the player and that you note the listed precaution. [. . . ] Before enjoying DVD/Video CD/CD The On-Screen menu language of your player has been factory pre-set to English. If you would like to change the menu language to other language, please refer to "OSD LANGUAGE". Switch on the stereo system's power if the player has been connected to a stereo system. When the menu continues onto another screen, press NEXT SKIP button to view the next screen, or press PREV SKIP button to skip to previous screen. NOTE: Due to the different design of NEXT button some software titles, may not always work. To stop play and return to the menu screen, press TITLE/RET button, or MENU/PBC button(what button is pressed differs depending on the disc used); for DVD disc, press TITLE/RET, or MENU/PBC, for Video Cds, press MENU/PBC. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position. When the disc cover is closed by pressing OPEN/CLOSE, the player will start to read the disc immediately. When a menu screen appears on the TV, move the navigation buttons or press the numeric buttons to select preferred track number, then press SELECT button to confirm. For your convenience: When player is stopped, the player records STOP was pressed the point where (RESUME function). Press PROGRAM button to select one of the effects when changing from one picture to another: 1 Press numeric buttons to select corresponding track, if the track number is under 10, choose one of the numeric buttons 0 ~ 9. â· If the track number is exceed 10, press +10 button firstly, then press numeric buttons 0 ~ 9. â· During playback, press RETURN button to return to main menu. â· Press NEXT SKIP button or PREV SKIP button, the player will play in the scheduled sequence on the disc. When the player is under operation, press DISPLAY button continuously on the remote control, the screen will display sequently parts of information. If the track number is more than 10, press the 10 key first and then the unit digit. Some keys maybe useless, for it 's more then title/chapter/track number in current disc. Example: Track 3, press "3" Track 12, press "+10" and then "2" Track 21, press "+10" twice and then "1" 3. To start program play, select PLAY on the menu or press PROGRAM button again to exit without program play. To clear all items, select the <CLEAR> on the menu, and then press SELECT button on remote control. To exit the program play status, you can clear all items in the program menu or press STOP button and play again. Note: Program menu different with disc type, shown on left side is DVD program menu. [. . . ] Hold the disc by the edges so the surface will not be soiled with fingerprints. Do not write on the label side with a ballpoint pen or other writing utensils. â· Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids. â· Do not try to close the disc tray when the disc is not installed properly. [. . . ]