User manual CLATRONIC DVD 655 LCD PROGRAMMING

[. . . ] The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated , , dangerous voltage" within the product`s enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. This symbol means that the unit complies with European safely and electrical interference directives. Do not use the unit in places which are extremely hot, cold, dusty, or humid. [. . . ] After loading, for some discs, the unit will automatically start playback of the disc. To resume playback at the position where the disc was stopped, press the PLAY button. If you press the STOP button twice, the unit's memory will be cleared and pressing the PLAY button will reset the disc to the beginning. For audio CD disc, use the number buttons (remote control only) to jump straight to that track number. Each time SEARCH or SEARCH button is pressed, the speed of fast scan changes in the following sequence: The speed of fast scan I (PREV/NEXT) buttons on unit repeatedly to select different fast scan speeds. ⷠOn some DVDs, subtitles are activated from the main menu of the DVD. Using DISPLAY, you can check and change the current settings of the following: ANGLE, AUDIO and SUBTITLE. ⷠWhile the disc is playing, press the DISPLAY button of the remote unit to display the screen shown below. Elapsed time: Elapsed time from the beginning of the chapter which is currently playing. Press the DISPLAY button twice on the remote unit to display the screen shown below. ⷠPress the GOTO button to set your desired title, then press the ENTER button to confirm. The number of the chapter currently playing and total chapters of the currently played title. ⷠPress the GOTO button to set your desired chapter, then press the ENTER button to confirm. Elapsed time from the beginning of the currently playing chapter and the remaining time from the beginning of the currently playing title. ⷠPress the GOTO button to set your desired point to start playback, then press the ENTER button to confirm. When a disc with only one angle is played back, , , Angle 1/1" is displayed. When a disc with only one subtitle is played back, , , 1/1 Eng" is displayed. This function allows you to skip directly to any part of the disc while a disc is playing. note : · After setting, press the DISPLAY button again on the remote unit to return to the normal screen. If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want. If you know the title / chapter / track number you want to play, you can locate a specifc title / chapter / track by directly selecting a title / chapter / track number. [. . . ] Use or button to shift and select Password, enter your 4-digit security code and then press the ENTER button. You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function. If you forget the password, you can erase your current password by pressing number button 8 on the remote four times, then press the ENTER button to confirm the setting. A defective or soiled disc inserted into the unit can cause sound to drop out during playback. [. . . ]