User manual CLATRONIC DVD 622 LCD NEW

[. . . ] The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated , , dangerous voltage" within the product`s enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. The symbol for Class II (Double lnsulation) This symbol means that the unit complies with European safely and electrical interference directives. Do not use the unit in places which are extremely hot, cold, dusty, or humid. [. . . ] If you press the STOP button twice, the unit's memory will be cleared and pressing the PLAY button will reset the disc to the beginning. For audio CD disc, use the number buttons (remote control only) to jump straight to that track number. Each time SEARCH or SEARCH button is pressed, the speed of fast scan changes in the following sequence: The speed of fast scan I (PREV/NEXT) buttons on unit repeatedly to select different fast scan speeds. While you are playing a disc, press the I NEXT button to move to the beginning of the next chapter or track. Press the I PREV button to move to the previous chapter or track and automatically start playing it. ⷠWhile an image is zoomed, you can use , , and button to shift the view and display the part you want. To return to the normal view, press the ZOOM button until the , , When you reach the edge of the image, the display will not move anymore in that direction. Some DVDs contain scenes which have been shot from a number of different angles. The number of the chapter currently playing and total chapters of the currently played title. ⷠPress the GOTO button to set your desired chapter, then press the ENTER button to confirm. Elapsed time from the beginning of the currently playing chapter and the remaining time from the beginning of the currently playing title. ⷠPress the GOTO button to set your desired point to start playback, then press the ENTER button to confirm. When a disc with only one angle is played back, , , Angle 1/1" is displayed. When a disc with only one subtitle is played back, , , 1/1 Eng" is displayed. This function allows you to skip directly to any part of the disc while a disc is playing. note : · After setting, press the DISPLAY button again on the remote unit to return to the normal screen. If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want. If you know the title / chapter / track number you want to play, you can locate a specifc title / chapter / track by directly selecting a title / chapter / track number. Press , or button to highlight a title / chapter / track and press the corresponding number button(s) for the chapter you want. You can move to a specific location by entering its corresponding time (hours, minutes, seconds) 1. Press the corresponding number buttons for the setting point you want. [. . . ] Use or button to shift and select Password, enter your 4-digit security code and then press the ENTER button. You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function. If you forget the password, you can erase your current password by pressing number button 8 on the remote four times, then press the ENTER button to confirm the setting. A defective or soiled disc inserted into the unit can cause sound to drop out during playback. [. . . ]