User manual CLATRONIC DVD 619 HC NEW

[. . . ] Make sure that there is at least 20 cm clearance at the back of the device. If one of the following occurs, immediately seperate the device from the power supply: a. Please store this operating manual carefully, so that you can refer to it in future. The device should only be cleaned with a duster or with a soft, slightly moist cloth that does not generate fluff. [. . . ] You can view single frames step-bystep by repeatedly pressing the PAUSE button . If you switch the signal source while a DVD is playing, the current position in the film is lost. Inserting a Data Carrier 1. While in DVD mode, open the drive by pressing the OPEN/CLOSE button on the remote control or on the front of the device. , , " appears on the display of the device and the device reads the data format. Selecting Menu Items Most commercial DVDs have a start screen with a menu where, for example, the dialog language, subtitles and audio formats can be selected. Use the arrow buttons on the remote control to select the desired menu item. It is possible that some sections cannot be skipped. Search Forward/Backward 1. To return to the main menu of the DVD, press the MENU button on the remote control. The device is muted during the search. 26 DVD 619 HC - GB 15. 08. 2003 9:57 Uhr Seite 27 Slow Motion Forward/Backward 1. During slow motion playback, the audio outputs are muted. Subtitle Some DVDs are equipped with various subtitles. Press the SUBTITLE button repeatedly to select between the available subtitles. The subtitle icon appears on the screen: Zoom 1. Data carriers with only one track cannot be programmed. 28 DVD 619 HC - GB 15. 08. 2003 9:57 Uhr Seite 29 Manually Saving a Station 1. Use the number buttons to enter the desired program location (for example 2-3). Press the ENTER button repeatedly to go to the individual presets and to the user-defined tone setting. Here you can use the arrow buttons to select the individual frequency bands and 4. In the multi-channel mode, the equalizer function is not available (see the "Settings" chapter). Tuner (Radio Mode) Press the FUNCTION button to switch to Radio mode appears on the display. Now it displays the currently frequency that is currently selected (for example ). The device starts to scan for available radio stations by ascending frequency and consecutively saves all detected stations on the memory locations. After the process has been completed, the radio station that has been saved on the first memory location will be played. There are 50 memory locations for FM stations, and 20 for AM stations. Press the left or the right of the search onto search backward or forward for stations. [. . . ] The Skip and Sometimes certain sectors of some Search functions data carriers have been programmed do not work. The Skip function does not work if there is only one chapter on the DVD. 32 DVD 619 HC - GB 15. 08. 2003 9:57 Uhr Seite 33 Technical specifications Operating voltage Power consumption Operating temperatur Operating humidity Weight (receiver) Video output level Y output level (S-Video) C output level (S-Video) Audio output level Dynamic range Distortions (CDDA) Wow and flutter Input sensivity Digital output Headphone output Laser wavelength Tuner Frequenzy range 230 V-50 Hz 150 W max. +5 bis +35°C 5-90% 4, 5 kg 1Vpp 75 1Vpp 75 0, 300V pp 75 (PAL) 0, 286V pp 75 (NTSC) 2V RMS 102 dB (DVD) 0, 025% <±0, 001% 500 mV (10 k) RCA (coaxial) 3, 5mm jack, min. 32 655 Nm PLL Quarz Digital Synthesizer FM: 87, 50-108 MHz (50 kHz/step) AM: 522-1620 KHz (9 kHz/step) FM: 50, AM: 20 15 W 7WX2 7WX2 7W Remote control AM loop antenna FM dipole antenna Station memory Max. [. . . ]