User manual CLATRONIC DVD 534 HC NEW

[. . . ] To avoid damages of radiation unit should be opened only by qualified service personnel. For your protection and for the safety of the device, we would like to remind you to observe the safety instructions highlighted in grey. About DVD video CDs and video CDs Playing a CD Content of DVD CDs (menus) Playing a video CD with PBC Freeze frame and single frame Slow motion Search Frame zoom function Repeat functions Language and subtitles Selection of the camera angle Other playback function Connections at the front of the device Connections on the rear of the unit Speaker connection 55/51 Aerial connection Connection to the television set Connecting additional units Headphone connection Mains connection 56 Playing a music CD General information about audio CDs Playing a CD Title selection and search mode Other playback functions Repeat functions Programme memory Device configuration (set-up) Preferred settings (language) Child lock Resetting to original factory settings Setting the automatic switch Cleaning the components Notes about compact disc (DVD-Video-CD), video-CD, audio-CD, MP3-CD) Notes about the CD Player Maintenance Protect the device against moisture and rain. It must not be operated in damp rooms nor subjected to drips or splashes. [. . . ] note: Depending on the CD that is inserted , the device switches to the highest preset AUDIO MODE. If no speakers are connected to the device then playback may be without sound, depending on the CD that has been inserted. To listen tothe CD via the television speaker you must switch over to STEREO (in SPEAKER SETUP PAGE, line AUDIO MODE). DVD video CDs and video CDs can contain films, video clips, television series, and so on. Every title on a DVD video CD can contain one or more sections (chapters). DVDs that do not contain a »2« on the code label can not be played on this device. Certain video CDs are equipped with a »Play Back Control (PBC) If the DVD receiver is connected to the television by SCART then switch over to the respective Scart input if necessary. If the DVD receiver is connected to the television via the VIDEO or SVIDEO socket then the corresponding video input must be selected at the television. Note: If the device is in PAUSE or STOP mode for more than a minute then the screen saver automatically appears. the screen saver disappears on pressing » II PLAY/ PAUSE« 3/39. The screen saver function can always be switched on or off in the BASIC SETTING menu in the SCR SAVER line. Some DVD-CDs contain selection menus for title and sections or a root menu to call up additionally stored information This menu can also contain selection possibilities for camera angle, dubbing languages, subtitle, etc. Depending on the DVD inserted, this menu can be called up by pressing »TITLE« 30, or by pressing »RETURN« 29. The corresponding selection menu then appears on the screen if the DVD or the title currently being played contains a menu. The menu item s are selected with the » / / / « 21 and confirmed by »ENTER« 21. If the menu items are numbered then these can be directly selected using the digit buttons. Playing a video CD with PCB If the video CD inserted is equipped with »Play Back Control (PCB)« then the PCB menu appears on the screen at the start of playback. The menu item s are selected with the » / / / « 21 and confirmed by »ENTER« 21. If the menu items are numbered then these can be directly selected using the digit buttons. Note: ­ During playback of a CD with PBC, the buttons »GOTO« 17, »REPEAT« 25 and the numeric buttons »1-0« do not function. ­ If the PBC function is active then you can switch back to the previous menu by pressing »RETURN« 29. In this case, playback of the video CD is stated using » II PLAY/ PAUSE« 3/39. [. . . ] Note: To help identifying the device in case of after-sales service, always mention the number of the ID on the inscription plate on the rear of the device. If the device fails to function normally, this does not necessarily mean it is defective. Please use the following list to check whether the malfunction has a simple cause. this invalidates the guarantee resulting in the manufacturer accepting no liability. [. . . ]