User manual CLATRONIC DO 2852 NEW

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. [. . . ] Take the tin opener in your right-hand and lift the cutting lever (4) with your thumb. Now place the tin which is to be opened on the side of the cutting mechanism with your left hand so that the lower side of the cutting edge is located on the toothed transport wheel (7). press the cutting lever (4) downwards until the cutting blade (6) touches the surface of the tin lid. Bring the adhesive magnet (5) into position by folding it down over the lid of the tin. When the cutting lever (4) is pushed down further the pushbutton (8) is operated and the tin opener switches on. the cutting blade (6) is automatically pulled into the tin lid and cuts it open. The opening procedure can be interrupted at any time by lifting the cutting lever (4). After the tin has been opened, hold it tightly in your left hand and lift the cutting lever (4) with the thumb of your right hand. The lid of the tin which has now been cut off is held by the adhesive magnet (5) and can be removed by hand. Please be careful when removing the lid of the tin from the adhesive magnet (5). The housing of the tin opener can be cleaned externally with a slightly moist cloth. The cutting lever (4) with the magnetic holder (5) and blade (6) can be removed from the housing (2) for cleaning. [. . . ] ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]