User manual CLATRONIC DBS 2825 NEW

[. . . ] Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead). [. . . ] Turn operating switch I (10) on the station to position I and move the steam regulator (9) to MIN. As soon as the control lamp goes off the operating temperature has been reached. When the lamp in operating switch II goes out there is enough steam for steam operation. You can set the desired quantity of steam with the steam regulator (9). With the steam jet button (2) you can produce a short powerful jet of steam or a permanent jet of steam by locking the fixing device (3) in place. Note: If there is still some residual pressure in the water tank, a safety lock prevents the water tank catch (7) from being opened. The residual pressure first has to be relieved before the device can be safely opened. With the steam jet button you can now release the residual steam pressure. When no further steam comes out of the iron sole plate, turn operating switch I to 0. Then please remove the mains plug and carefully open the water tank lock (7). With the help of a funnel fill freshwater from a measuring beaker into the water tank. In order to prevent the water from splashing it should be filled into the funnel slowly after the safety lock has been opened. Note: Never open the water tank lock while the device is being operated. When ironing at low temperatures, please ensure that you reduce the quantity of steam or iron without steam altogether. Vertical Steam This can be used to produce a jet of steam in a vertical direction. Self-Cleaning Any lime residues which form in the sole plate are automatically removed due to the heat and steam pressure. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]