User manual CLATRONIC DBC 2899 NEW

[. . . ] Fonctions du pied support Réglage du variateur de fonctions à gauche à droite au milieu Fixation Grâce au dispositif situé dans le support, vous pouvez fixer l'appareil à une table. Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. [. . . ] Preferably use distilled water or clear tap water (maximum water hardness level 2). Do not fill battery water, water from the clothes dryer and water containing additives (such as starch, perfume, softener or other chemicals) into the water reservoir. this could damage the iron due to residues forming in the steam chamber. These residues may cause impurities to the fabric when dropping out of the holes in the soleplate. Ironing without steam (steam regulator turned to position , , b") 1. Only connect the machine to a properly installed safety socket, 230 V/50 Hz. As soon as the indicator light goes out the desired operating temperature has been reached (approx. The quantity of steam can be regulated using the steam quantity regulator (1). B no steam Small steam volume Large steam volume Extra steam can be added with the steam jet function (7). Vertical Steam This can be used to produce a jet of steam in a vertical direction. Spray Function If you wish to moisten an area which is to be ironed, press the spray button (6). After the control lamp goes off remove the machine from the mains supply. Always return the steam regulator to the , , b" position after use and empty the water tank in order to prevent any leaks. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]