User manual CLATRONIC CTV 579 VT PROGRAMMING

[. . . ] Enter the page number you want on the Remote Control ( it must be three digits ). Fit the Batteries into the Remote Control according to the diagram in the battery compartment. Plug your TV into the mains and switch ON using the button on the front panel. [. . . ] If you switch off the TV set by using button on the front panel, you will need re-enter the time. You can change succession of stored programmes, give tittles to the programmes (Label), select standards of colour systems' (Colour) and sound (RF Std), hide programmes in list (Skip). With the Organize menu on the screen, use the P+ or P- to select Pr--, and VOL+ or VOL- to select the number of programme which you wish to move. Then press the remote control key PP and the programme will be moved into the new location. Use the P+ or P- to select the parameter you wish to change: Label (programme title), Colour (colour system), RF Std. Label: Use the VOL+ to select the position of character being added, and use the P+ or P- to select the character from A-Z, +, -, space, 0-9. After selecting the first character, use the VOL+ to pass to the next position, or use the VOL- to pass to the previous position, and then use the P+ or P- to select the second character of title, etc. If Yes is selected, your TV set will skip that programme when you step through the programme numbers using the P+ or P- keys. The manual tuning is only necessary if: a) you want to tone tune a particular programme, b) the signal of programme is weak. With the Install menu on the screen, using the remote control key P+ or P- , highlight Manual Tune. With Install menu on the screen, using the P+ or P- keys, highlight Store. Using the VOL+ or VOL- keys on the remote control select required programme number (for example, Program Pr. Using the P+ or P- keys on remote control highlight Store and press OK. For tuning and storing other programs, you should press the MENU key and repeat steps from 2 to 8. Using the VOL+ Organize Function and VOL- keys enter the correct time. The hours (00 to 23) are set Language by using VOL-, and the minutes (0 to 59) - by using VOL+. [. . . ] MENU tables from the TV screen disappears after pressing the remote control key MENU one or several times or about after 5 seconds after the last action in these tables. You will learn how to use TV set and what to do to prolong its service life. Do not place anything on the television and leave a space of at least 5cm around the set. [. . . ]