User manual CLATRONIC CTV 580 ST

[. . . ] Use the remote control to select a programme with Teletext information. Page numbers in coloured rectangulars will appear at bottom of the screen. You can select these pages by pressing corresponding coloured buttons. [. . . ] If you want cancel the code, you must select the Setup Function menu, then highlight Lock, and using the VOL+ or VOL- keys cancel the lock (No). If you want to switch the menu off, press this key one or two times more. Coloured keys RED, GREEN, YELLOW, BLUE keys are used for quick access to Teletext topics (depends on Teletext properties). By pressing this key the AV1, AV2, RGB, TV are selected in series (more details in chapter "AV modes" ). If you make a mistake or do not need automatic switching anymore, you can cancel it by selecting Time in Setup menu and pressing OK on the remote control. To switch on and off TV set automatically it must be switched by using the POWER key on the remote control. If you switch off the TV set by using button on the front panel, you will need re-enter the time. You can change succession of stored programmes, give tittles to the programmes (Label), select standards of colour systems' (Colour) and sound (RF Std), hide programmes in list (Skip). With the Organize menu on the screen, use the P+ or P- to select Pr--, and VOL+ or VOL- to select the number of programme which you wish to move. Then press the remote control key PP and the programme will be moved into the new location. Use the P+ or P- to select the parameter you wish to change: Label (programme title), Colour (colour system), RF Std. Label: Use the VOL+ to select the position of character being added, and use the P+ or P- to select the character from A-Z, +, -, space, 0-9. After selecting the first character, use the VOL+ to pass to the next position, or use the VOL- to pass to the previous position, and then use the P+ or P- to select the second character of title, etc. If Yes is selected, your TV set will skip that programme when you step through the programme numbers using the P+ or P- keys. The manual tuning is only necessary if: a) you want to tone tune a particular programme, b) the signal of programme is weak. With the Install menu on the screen, using the remote control key P+ or P- , highlight Manual Tune. With Install menu on the screen, using the P+ or P- keys, highlight Store. Using the VOL+ or VOL- keys on the remote control select required programme number (for example, Program Pr. [. . . ] After switching television set from standby to operating status, the red indicator go down. Your television set is controlled by using MENU tables Picture, Audio, Install, Setup. These tables appear on the screen after pressing remote control button MENU one or more times. [. . . ]