User manual CLATRONIC CDP 604 NEW

[. . . ] The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened. Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light. 1) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 II CD play/pause key CD stop/off key I PREV key (reverse search) I NEXT key (forward search) MODE key AUDIO/EQ key (left/right channel/equalizer) PROG/PBC key NP/ESP/DIR key HOLD OFF/ON key lock OPEN CD compartment Sensor for the remote control DC 4. 2) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 MUTE key P/N (PAL / NTSC) key II CD play/pause key CD stop key Number keys 1-10 10 + key TIME key DIGEST key OSD key RETURN key PBC key RESUME key I CD SKIP key (reverse skip) SLOW key PROG key (CD programming) CD key (reverse search) ZOOM key CD key (forward search) VOL + volume key REPEAT key I CD SKIP key (forward skip) L/R (left/right channel) key VOL ­ volume key 65 Note: Some keys are to be found both on the device itself and on the remote control. [. . . ] If the player is jolted, the CD music data is read out continuously from an intermediate memory. When the anti-shock function is activated a bar appears in the display which slowly fills up. DIR function only in MP3 mode: When an MP3 CD is inserted, this key is used to select the various directories stored on the CD. N/P function only in VCD mode: Used to switch between the "NTSC" and "PAL" video output systems. The following functions can be selected with the MODE key: Press once = , , REP": The current track is repeated continuously. press twice = , , REP ALL": The current CD is repeated continuously. Press 3 times = , , RAN": All tracks are played back in random order. Functions in Playback Mode of an MP3 CD: Press once = , , REP": The current track is repeated continuously. press twice = , , REP DIR": The currently selected directory (the album) is repeated continuously. Press 3 times = , , REP ALL": The entire CD is repeated continuously. Press 4 times = , , RAN": All tracks are played back in random order. CD Keys on the Remote Control MUTE (1): P/N (2): Used for switching off the sound immediately. With the TIME key you can enter the time from which playback is to start. The first set of figures represents the minutes and the second set the seconds. When this key is pressed, the player subdivides the VCD file currently being played into nine parts of equal size and displays pictures on the screen at the same time. With the 1-9 number keys you can change to the desired section, which is then animated. Press the key DIGEST again to continue from the selected section in full picture mode. SINGLE REMAIN, the number of the track and the remaining playing time of the CD. Press the key up to five times and select between the various settings. This function can only be used if the CD that has been inserted is a video 2. If the RESUME key is then pressed, playback resumes from the position where playback was interrupted (only in VCD mode). Switches on the slow motion function during the playback of video CDs. [. . . ] Select between the speeds 1/2 , 1/4, 1/8, 1/16 Resumes from the same position after stop (see RESUME) Shows the pictures in a small format (see DIGEST) Used to enlarge a picture section (see ZOOM) Switches between the audio channels With this key you can skip to the next or next-but-one track etc. (4/18)) Switches between simple repeat, DIR repeat (only MP3), repeat all. EQ function: Use the I / I keys to switch between the settings STAND, CLASS; DISCO; JAZZ; POP. For two-digit numbers first press the +10 key and then the units figure. [. . . ]