User manual CLATRONIC CDP 602 NEW

[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. [. . . ] if the switch is pushed to the right , the word , , HOLD" appears in the display. The charging function is activated when connected to an external mains line (ON). Note: In order to create the contact to the battery, please use the charging socket supplied. Switching off The machine is switched off by pressing the STOP button once, or twice if one of the devices is still running. Insert a CD with the label facing upwards and press carefully over the button until it snaps into place. The track currently being played and the time that has elapsed are shown in the display. To remove a CD, press the STOP key, open the CD deck with the OPEN key and take out the CD carefully. Please note these instructions for playing back CDs and CDRs in MP3 format! note: If a disc is inserted incorrectly , or no disc is inserted , the symbol , , DISC" appears in the display. VOL-/+: / II PLAY/PAUSE: I SKIP-: You can set the desired volume using the VOLUME control. If the button is kept pressed down, the machine starts to search through the tracks (The sound is muted). With this button you can jump to the following track or the next track but one etc. If the button is kept pressed down, the machine starts to search through the tracks (The sound is muted). It fills the 45-second electronic memory to protect against the jumping of the CD. If the CD is jolted the music data on the CD is read out of an intermediate memory (buffer store) so that playback is not disturbed. When antishock is activated a bar appears in the display which slowly fills up. MODE: The following functions can be selected with the MODE key: Press once = , , 1": the current track is repeated continuously. Press a second time = , , ALL": the whole CD is played continuously. If the / II button is pressed, all tracks are played back in random order. Use theI / I SKIP-/+ buttons to select the desired track and then press the PROG button again. [. . . ] For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]