User manual CLATRONIC CDP 548 NEW

[. . . ] Assemble the device in such a way that the available ventilation openings are not covered. Should the device become damaged, in particular the mains supply cable, do not operate the device any longer, but rather have it repaired by an expert. For safety reasons a broken or damaged mains lead may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similary qualified person. [. . . ] AC Adapter Mode (not supplied) You can also use the device with an adapter. Connect the CD player to the AC adapter by connecting the jack of the adapter into the 4. the charging function is activated when connected to an external mains line. Switching off The machine is switched off by pressing the STOP button once, or twice if one of the devices is still running. Insert a CD with the label facing upwards and press carefully over the button until it snaps into place. "- -" appears in the display followed by the number of tracks. The track currently being played and the time that has elapsed are shown in the display. To remove a CD, press the STOP key, open the CD deck with the OPEN key and take out the CD carefully. If the button is kept pressed down, the machine starts to search through the tracks. With this button you can jump to the following track or the next track but one etc. If the button is kept pressed down, the machine starts to search through the tracks. The following functions can be selected with the MODE key: Press once = , , REPEAT 1": the current track is repeated continuously; Press a second time = , , REPEAT ALL": the whole CD is played continuously; Press a third time = , , INTRO": All tracks are played for ten seconds. Select the desired track with the PREV/NEXT button and press the PROG key again. Select the next track with the PREV/NEXT key and press the PROG key again. Press once the STOP key to stop the playback while retaining the program. To resume the playback of the program press first the PROG key once and then the PLAY/PAUSE key. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]