User manual CLATRONIC BS 1240 NEW

[. . . ] Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead). [. . . ] In order to facilitate control, the floor nozzle is fitted For curtains and delicate fabrics For long-pile velour carpets and textile flooring For sturdy rugs and floors With rollers and can be adjusted to suit the circumstances Carpet: make sure that the brushes on the floor nozzle are deactivated when cleaning carpets. If this is not the case, press the lever on the floor nozzle forwards with your foot. In order to vacuum even surfaces, for example, press the lever back with your foot. This activates the brushes (you can tell whether this is the case by checking that the brushes are visible on the floor nozzle). The traditional dust bag system has been replaced by a transparent dust collection container in which coarse dirt particles and tiny particles floating in the air are swirled out of the suction air by the high speed of the air current. The quantity of dust can be easily read off at any time on the container, which is also very easy to empty. Once the dust level has reached the MAX mark on the dust container, please proceed as follows: In order to do this, press the button on the dust container. Important: Always empty the dust container first before you remove the filter insert. Please clean the motor protection filter by tapping and brushing out gently. Every third time the dust container is emptied, or in the case of severe soiling, clean the filter by allowing water to flow through the filter fabric against the direction in which the vacuum cleaner blows. The dust container should only be reinserted when it is completely dry!In order to ensure that the filters function perfectly, we recommend that they are cleaned every six months. One filter is to be found inside the device close to the hinges of the lid. The other is located on the rear of your device behind a ventilation grille. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]