User manual CLATRONIC BS 1234 NEW

[. . . ] Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead). [. . . ] Carpet: make sure that the brushes on the floor nozzle are deactivated when cleaning carpets. If this is not the case, press the lever on the floor nozzle forwards with your foot. In order to vacuum even surfaces, for example, press the lever back with your foot. This activates the brushes (you can tell whether this is the case by checking that the brushes are visible on the floor nozzle). The traditional dust bag system has been replaced by a transparent dust collection container in which coarse dirt particles and tiny particles floating in the air are swirled out of the suction air by the high speed of the air current. Motor Protective Filter (in the Dust Container) The filling level indicator (7) shows when the dust container has to be emptied. You should then proceed as follows, making sure you adhere to the following order of steps: 1. Fold the handle (5) upwards and pull the dust container out of the vacuum cleaner together with the filter insert (6) (see illustration 1). In order to do this, press the button on the dust container (see illustration 2). Every time the vacuum cleaner is emptied the filter screen on the floor of the dust housing should be cleaned (see illustration 3). Clean the motor protection filter (11) by tapping and gently brushing out (see illustrations 4). Every third time the dust container is emptied, or in the case of severe soiling, clean the filter by allowing water to flow through the filter fabric against the direction in which the vacuum cleaner blows. The dust container should only be reinserted when it is completely dry!In order to ensure that the filter works correctly, we recommend that you replace it every six months. [. . . ] *) Damage to accessories does not mean automatic free replacement of the whole machine. Broken glass or breakage of plastic parts are always subject to a charge. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]