User manual CLATRONIC BQ 2977 NEW

[. . . ] Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. the appliance is designed exclusively for private use and for the envisaged purpose. Do not use it outdoors (except if it is designed to be used outdoors). [. . . ] Please ensure that the mains lead does not come into contact with the hot sections of the device. Do not touch the hot sections of the device; please use the buttons and handles provided. If the unit is used outdoors, take the following precautions: ­ Use the unit only in fine weather conditions. Clean the grilling grid (5) and the grilling trough (4) with a damp cloth. This prevents the heating element being operated outside the grill tray. If the heating cannot be switched on, please check the mains connection and that the control unit is correctly positioned in the grilling trough. 8 litres of cold water into the grill tray up to the , , MAX" Mark. The water bath and the metal sheet prevent excessive heat radiation in the area of the standing surface of the grill. Before using for the first time, fill the grill tray with water and use it for 15 minutes to remove the protective film from the heating coil. Turn the device on by the switch and wait for approximately 5 minutes until it has heated up. Thick foods are grilled more quickly by piercing it with metal skewers. Should the water level drop below the MIN mark after continuous use, pull the plug from the socket and fill with water until the MAX mark is reached. This prevents the heating element being operated outside the grill tray. Should it not be possible to switch on the heating, please check the mains connection and that the control unit is correctly positioned in the grilling trough. Always pull the plug from the mains socket before cleaning and wait until the unit has cooled down. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. ) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. [. . . ]