User manual CLATRONIC AR 773 DVD

[. . . ] 24 PAIR/ : Bluetooth Mode: - Press briefly: Re-establishing a connection and dialling a telephone number that you have entered. - Press longer: Registering devices with one another and calling up the Bluetooth menu. Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions. [. . . ] You now hear the sound from the external device played back through the loudspeakers. NOTE: Press this button during a call in order to transfer it back to your mobile telephone. If you press the button again the call is transferred back to the car radio. CLK Button (Time) (on the remote control) a) Press the CLK button in order to bring up or hide the clock. Carry out the settings with the help of the VOL multifunction button (3). Carry out the settings with the help of the VOL multifunction button (3). Using the Number Buttons Numerical buttons (11 on the remote control) as Station buttons (1­6) of preselected stations and as 1TOP-, 3 INT-, 4 RDM buttons during CD operation a) Radio Operation Pressing these buttons briefly directly selects a preset radio station. If these buttons are pressed for more than one second, the station currently being listened to is stored under the selected station button. b) CD Operation Pressing briefly directly selects the corresponding CD/MP3 track. Keep the corresponding button (1TOP, 3INT, 4RDM) pressed for approximately 3 seconds in order to switch the following functions on and off: · Press the 1TOP button to jump to the first track of the CD/MP3. In the case of DVDs you can repeat the chapter, title or the entire DVD. Here you can use the , , , buttons (9 on the remote control) of the remote control to choose between 4 options. Confirm your selection with the ENTER button (8 on the remote control). Button (Operating unit angle) You can change the viewing angle of the operating unit. Press the button up to four times in order to select the desired position. There is a danger of injury if the operating unit returns to the normal position. Keep the button pressed down to make the connection between the devices (BLUETOOTH PAIRING appears in the TFT display). Press the button briefly after the connection between the devices has been interrupted (e. You can choose between the LOC(AL) and DX (DISTANCE) mode for local or long-distance traffic news. LOC(AL): This function prevents switching to an EON station whose signal is too weak. The radio does not switch to this station and the listener does not hear any interference. DX (DISTANCE) Mode: In this mode the EONTA circuitry tries to receive the EONTA information from any available transmitter and thus improve reception quality. [. . . ] Please contact your car workshop or a vehicle specialist for connection adapters may specifically for your model. The device cannot be The control processor operated, but , , hangs of the device may up". In automatic search mode the radio does not stop at a transmitting station. It is possible that your Please contact your vehicle has a special car workshop or a antenna (phantomvehicle specialist. [. . . ]