User manual CLATRONIC AR 638 NEW

[. . . ] The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened. Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light. Note: h Retaining screws during transport (please remove before installation) I Extraction tool (spanner for dismantling) j Frame First place the operating panel in position on the right-hand side and then lock it into place on the left. Do not attach the removable control panel until after connection of the cables. [. . . ] If you would like to scroll the titles of the tracks keep the I or I arrow button pressed. 9 Mode Button Press this button to select the CD player or radio mode. 10 MUTE Button Press the MUTE button to switch off the loudspeakers for a short time. 11 AP Button (Autostore - Automatic Station Storage) In radio mode: a) Memory function : Press the AP button for longer than one second to activate automatic station storage. FM 1, for the strongest signal level until the search cycle has finished. the six strongest stations are then allocated to the corresponding storage locations. The stations that have now been stored are played for approximately 3 seconds each and then the station of the first storage location is set. If you would like to search for more stations in the FM band, press the BAND button in order to change to the FM 2 or FM 3 band. Press the AP button again for more than one second in order to start the continued search. B) Scan Function: After the AP button has been pressed briefly the radio plays all the pre-set stations in the current frequency band for a short time. Note: The scan function ends automatically when it reaches the storage location from which it started. AP button as a search function during MP3 playback If the corresponding data were created when a CD was made in MP3 format, these can be searched for using the following functions: With the help of the +/- buttons it is now possible to put in a track number from 0 to 9 in the units place. Press the SEL button briefly once more to put in a hundreds place if necessary. Press the SEL button for 1 second to complete entry of the track numbers. Using the +/- buttons it is now possible to select the various directories on the CD. Press the SEL button briefly and you can select a track in the directory using the +/- buttons. By repeatedly pressing the +/- buttons you can now enter a letter from A to Z or a number from 0 to 9 in the first position of the display. Note: The following letters and numbers are entered from left to right. Proceed as for the entry of numbers and letters as described under 3 above. Repeat the process described under 2 and 3 above until you have entered your search term. Complete entry of the search term by pressing the SEL button for 1 second. Note: It is not possible to guarantee that CDs created by the user can be played back due to the large variety of software and CD media available. [. . . ] During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. [. . . ]