User manual CLATRONIC AR 557 CD NEW

[. . . ] The built-in safety switches should prevent the user being exposed to dangerous laser light, which is invisible to the human eye, when the CD compartment is opened. Under no circumstances should these safety switches be bypassed or manipulated, as this could result in a danger of exposure to the laser light. Note: h Retaining screws during transport (please remove before installation) I Extraction tool (spanner for dismantling) 0, 5 A White Grey Red on the right White on the left Red on the right White on the left Do not attach the removable control panel until after connection of the cables. For proper instalment of your car radio, please make sure that your car provides an original "ISO JACKET". [. . . ] The signal is too weak, however, and reception is poor as this EON station is too far away. Therefore the radio switches back to the station that was set previously. During the type of operation described above the listener hears the wrong programme for a short time or nothing at all. EONTA LOCAL: This function prevents switching to an EON station whose signal is too weak. The radio does not switch to this station and the listener does not hear any interference. EONTA DISTANCE Mode: In this mode the EONTA circuitry tries to receive the EONTA information from any available transmitter and thus improve reception quality. Press the v or w button for more than one second to start the automatic search for a radio station with a strong signal level. If you would like to scroll the titles of the tracks keep the v or w arrow button pressed. 9 REL Button Press the REL button if you want to remove the front control panel to take it with you. 10 Mode Button Press this button to select the CD player or radio mode. 11 MUTE Button Press the MUTE button to switch off the loudspeakers for a short time. 12 AP Button (Autostore - Automatic Station Storage) In radio mode: a) Memory function : Press the AST button for longer than one second to activate automatic station storage. FM 1, for the strongest signal level until the search cycle has finished. the six strongest stations are then allocated to the corresponding storage locations. The stations that have now been stored are played for approximately 5 seconds each and then the station of the first storage location is set. If you would like to search for more stations in the FM band, press the BAND button in order to change to the FM 2 or FM 3 band. Press the AP button again for more than one second in order to start the continued search. B) Scan Function: After the AP button has been pressed briefly the radio plays all the pre-set stations in the current frequency band (FM, MW, LW) for a short time. Note: The scan function ends automatically when it reaches the storage location from which it started. AP button as a search function during MP3 playback a) Direct input of the track number for CDs in MP3 format: 1. With the help of the +/- buttons it is now possible to put in a track number from 0 to 9 in the units place. Press the SEL button briefly once more to put in a hundreds place if necessary. [. . . ] During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. [. . . ]