User manual CASIO XJ-S30

[. . . ] E DATA PROJECTOR XJ-S30/XJ-S35 User's Guide Be sure to read the precautions in the separate User's Guide (Basic Operation). For details about setting up the projector and lamp replacement, see the User's Guide (Basic Operation). Be sure to keep all user documentation handy for future reference. · DLP is a registered trademark of Texas Instruments of the United States. · Microsoft, Windows, Windows NT, Windows XP, and the Windows logo are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. [. . . ] Use the [ ] key to select "Restore Menu Defaults". Press the [ENTER] key. This will display a confirmation screen like the screen shown below. 6 7 8 Use the [ ] key to select "Yes". To restore the settings of the main menu to their initial defaults, press the [ENTER] key. To exit the operation without doing anything, press [ESC] instead of [ENTER]. After you are finished, press the [MENU] key to exit the setup menu. Note The language setting and the password are not returned to their initial factory defaults if you select Option Settings 1 in step 3. For details about how the above procedure initializes settings, see the explanations of the settings under "Setup Menu Contents" on page 17. 16 To restore all settings on the setup menu to their initial factory defaults 1 2 3 4 Press the [MENU] key to display the setup menu. ] key to select "Restore All Defaults", and then press the [ENTER] This displays a confirmation message asking if you want to initialize all settings. Use the [ ] key to select "Yes". To restore all settings on the setup menu to their initial defaults, press the [ENTER] key. This will restore all of the settings to their initial factory defaults, except for the Language, Lamp Time, and password settings. To exit the operation without doing anything, press [ESC] instead of [ENTER]. 5 After you are finished, press the [MENU] key to exit the setup menu. Setup Menu Contents This section contains tables that provide detailed explanations of all of the items included on the setup menu. The following describes the type of information that appears in each of the columns of the tables. Setting Name This column shows the names of the settings as they appear on the sub-menu. Input This column shows the input source for which each setting is supported. Input source names are abbreviated as R (RGB input), C (component video input), V (video input), and U (USB input, XJ-S35 only). The letter N indicates that the setting can be configured while there is no input signal. "Source Specific" in this column indicates that separate settings can be stored for each individual input source. For example, you could store an "Image Adjustment Brightness" setting of ­1 for RGB input and a setting of +1 for VIDEO input. "Single" in this column indicates that a single setting is stored and applied, regardless of the input source. Description This column provides details about the setting item and how to select it. The initial default setting is indicated by an asterisk (*). 17 Image Adjustment Main Menu Setting Name Brightness Input RCVU Setting Unit Source Specific Description Use this sub-menu to adjust the brightness of the projected image. Use this sub-menu to adjust the sharpness of the outlines in the projected image. A larger value makes the image sharper, while a smaller value makes it softer. Use this sub-menu to adjust the color saturation of the projected image. A larger value makes the overall image more bluish, while a smaller value makes the overall image more reddish. You can select from among five different color mode settings to optimize the projected image in accordance with image contents and projection conditions. Presentation*: Use this setting for standard presentations in a well-lit area. This is the initial default setting when the input source is either RGB or USB. Standard: Use this setting when you want to highlight the colors of your presentation. [. . . ] This sub-menu item shows the signal name of the signal being input to the projector. For details about signal names, see "Signal Name" under "Supported Signals" on page 34. This sub-menu item appears only when RGB or component is the input signal. It shows the number of vertical pixels of resolution of the RGB input signal. [. . . ]