User manual CASIO WK-1630

[. . . ] 8 Sound Source Instrument Part Sub-block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MIDI Send by Auto-accompaniment, Song Memory, and the SMF Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Product Configuration as a MIDI Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 3 4 Conditions that Disable Message Send and Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Piano Tone Operations (PX-410R/PX-575R) Only in cases when a piano tone is selected (Part Mode set to Piano Mode), the operation that corresponds to the value assigned to Hold1 continually changes the release time. It does not toggle sustain off and on. 13 Acoustic Resonance Operations (PX-410R/PX-575R) When the Acoustic Resonance effect is selected, resonance characteristics continually change in accordance with value assigned to Hold1. 10. 9 Format Sostenuto (42H) Message Format: BnH 42H vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see the "43. 1 Off/On Setting Value Table" in "Part VIII Setting Values and Send/Receive Values. " Send Sent when the assignable jack is configured for sostenuto and the connected pedal is operated. With the PX-410R and PX-575R, this message is sent when the dedicated sostenuto pedal is operated. Receive Receipt performs an operation equivalent to a sostenuto pedal operation. 10. 10 Format Soft (43H) Message Format: BnH 43H vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see the "43. 1 Off/On Setting Value Table" in "Part VIII Setting Values and Send/Receive Values. " Send Sent when the assignable jack is configured for soft and the connected pedal is operated. With the PX-410R and PX-575R, this message is sent when the dedicated soft pedal is operated. Receive Receipt performs an operation equivalent to a soft pedal operation. 10. 11 Format Envelope Release Time (48H) Message Format: BnH 48H vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43. 5 -64 to 0 to 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent when Release Time is changed. 14 Receive Receipt changes Release Time. 10. 12 Format Envelope Attack Time (49H) Message Format: BnH 49H vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43. 5 -64 to 0 to 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes Attack Time. 10. 13 Format Filter Cutoff (4AH) Message Format: BnH 4AH vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43. 5 -64 to 0 to 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent when Filter Cutoff is changed with the synthesizer function. Receive Receipt changes Filter Cutoff. 10. 14 Format Filter Resonance (47H) Message Format: BnH 47H vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43. 5 -64 to 0 to 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent when Filter Resonance is changed with the synthesizer function. Receive Receipt changes Coarse Tune of Mixer Part 1 through 16. 10. 21. 4 Format Modulation Depth Message Format: BnH 64H 05H 65H 00H 06H mmH 26H 00H n: MIDI Channel Number mm: Value (Note 1) Note 1: The setting value matches the value that is sent and received. Receive Receipt changes Vibrato depth. 21 10. 21. 5 Format Null Message Format: BnH 64H 7FH 65H 7F n: MIDI Channel Number Send This message is never sent. Receive Receipt deselects RPN. 10. 22 Format All Sound Off (78H) Message Format: BnH 78H 00H n: MIDI Channel Number Send This message is never sent. Receive Receipt stops all voices that are sounding. 10. 23 Format Reset All Controllers (79H) Message Format: BnH 79H 00H n: MIDI Channel Number Send Sent when the song function is used. Message Control Change Number 01H 02H 04H 0BH 40H 42H 43H 65H/64H 63H/62H Controller Modulation Breath Controller Foot Controller Expression Hold1 Sostenuto Soft RPN MSB/LSB NRPN MSB/LSB Value 00H 00H 00H 7FH 00H 00H 00H 7FH/7FH 7FH/7FH 00H 40H/00H Channel Pressure Pitch Bend Change 22 11 11. 1 Format Mode Message All Notes Off (7BH) Message Format: BnH 7BH 00H n: MIDI Channel Number 11. 2 Format Omni Off (7CH) Message Format: BnH 7CH 00H n: MIDI Channel Number 11. 3 Format Omni On (7DH) Message Format: BnH 7DH 00H n: MIDI Channel Number 11. 4 Format Mono (7EH) Message Format: BnH 7EH 00H n: MIDI Channel Number 11. 5 Format Poly (7FH) Message Format: BnH 7FH 00H n: MIDI Channel Number Send These messages are never sent. Receive Receipt of any of these messages releases (same as releasing the keyboard key) the currently sounding voice. 23 12 Format Program Change Message Format: CnH ppH n: MIDI Channel Number pp: Program Number Send Sent when a tone is selected. See the separate program numbers. Appendix A that accompanies with this Model for details about Receive Receipt changes the tone of the part corresponding to the MIDI Channel. The selected tone is determined by the program value of this message and the Bank Select message value received prior to this message. See the separate Appendix A that accompanies with this Model for information about actually selecting tones, etc. Also note that receipt of this message may also change the Part Mode parameter at the same time. For more information, see "12. 1 About the Part Mode" below. 12. 1 About the Part Mode Each of this Model's parts has a parameter called "Part Mode, " which can be set to Normal Mode, Drum Mode, or Drawbar Organ Mode. [. . . ] F7 System Exclusive Format 01 02 03 04 05 06 07 08 09 10 11 12 13 SYSEX MAN MOD dev act cat prm ps index data sum EOX ilen/dlen See "IV This Model's System Exclusive Messages". 35 User Rhythm Pattern Field Value F0 44 11, 02 Either 00 to 1F, or 7F 04(HDS), 05(HDR), 07(Control) User Rhythm = 0B 00 Indicates the rhythm number being transferred. F7 System Exclusive Format 01 02 03 04 05 06 07 08 09 10 11 12 13 SYSEX MAN MOD dev act cat prm ps index data sum EOX ilen/dlen See "IV This Model's System Exclusive Messages". 64 36 Registration Data Field Value F0 44 11, 02 Either 00 to 1F, or 7F 04(HDS), 05(HDR), 07(Control) Registration = 0C 00 Indicates the registration number being transferred. F7 System Exclusive Format 01 02 03 04 05 06 07 08 09 10 11 12 13 SYSEX MAN MOD dev act cat prm ps index data sum EOX ilen/dlen See "IV This Model's System Exclusive Messages". Note 1: The relationship between the "Bank", "Number" and "ps (parameter set)" are as shown below. Bank 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 Number 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 ps 0020H 0021H 0022H 0023H 0024H 0025H 0026H 0027H 0028H 0029H 002AH 002BH 002CH 002DH 002EH 002FH Bank 5 5 5 5 6 6 6 6 7 7 7 7 8 8 8 8 Number 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 ps 0030H 0031H 0032H 0033H 0034H 0035H 0036H 0037H 0038H 0039H 003AH 003BH 003CH 003DH 003EH 003FH 65 37 User Drawbar Parameter Set Field Value F0 44 11, 02 Either 00 to 1F, or 7F 04(HDS), 05(HDR), 07(Control) Drawbar = 0D 00 Indicates the drawbar number being transferred. [. . . ]