User manual CASIO SF-R10

[. . . ] Slide the battery holder in the direction indicated by the arrow in the illustration. Battery holder 1 Before using the unit for the first time 4. Load the new battery into the battery compartment, making sure that the positive (+) side of the new battery is facing up (so you can see it). Slide the battery holder back to its original position as indicated by the arrow in the illustration. Battery holder 6. Slide the battery switch to the "REPLACE 2, 3" setting and repeat steps 3 through 5 for the other batteries. [. . . ] Remember that the delete operation cannot be undone. 40 Using the Schedule Keeper Using the Schedule Keeper The Schedule Keeper lets you store data about your appointments to keep you on time all the time. You can even set Schedule Alarms that remind you when it is time to get ready for your appointments. When you input data for a specific date, a marker appears next to that date on the calendar to let you keep track of your schedule at a glance. Each Schedule Keeper data can contain up to 384 characters, including newline symbols. Note When there is a lot of Schedule Keeper data stored in memory, operations such as display of the calendar and data communication take more time. To enter the Schedule Keeper You can use either of the two following methods to enter the Schedule Keeper. The Schedule Keeper screen for the current date set on the Home Time display appears. Display the calendar and move the cursor to the date you want, then press SCHEDULE. The Schedule Keeper screen for the day you select appears on the display. To specify a date Schedule Keeper data is stored along with its date, with the date being treated as a separate data entry. Use the following procedure to specify a date in the Schedule Keeper Mode. The Index Display that contains that date appears on the display. About Schedule Keeper data and initial displays. . . Schedule Keeper information is stored under dates, with each date acting as a unit called a data item. In the Schedule Keeper, the appearance of the currently displayed date depends on whether or not Schedule Keeper data is already stored under that date. Enter the Schedule Keeper and recall the data for which you want to set or change a schedule alarm. Press FUNC to display the function menu and then press 1 to select ITEM EDIT. Use the H and J cursor keys to move between the hour and minutes setting. Whenever the schedule alarm setting is shown on the display, pressing DEL clears the alarm time and displays the prompt "ALM TIME?". Note that the schedule alarm setting is cleared from the display when you press SET. To view a data entry's current schedule alarm setting 1. Enter the Schedule Keeper and recall the date whose schedule alarm setting you want to view. Press NEXT to switch the index display to show the schedule alarm settings for all entries stored under the date you are viewing. To clear the schedule alarm times, press NEXT again. To delete a specific schedule alarm 1. Enter the Schedule Keeper and recall the data for which you want to delete the schedule alarm. Press FUNC to display the function menu and then press 1 to select ITEM EDIT. After deleting the alarm time, press SET to store the entry into memory. 44 Using the Schedule Keeper Where to find other information For information on searching for and recalling data already stored in memory, see "Recalling data stored in memory" on page 59. [. . . ] Press this key to shift-lock the keyboard between upper-case and lower-case characters. Press this key to delete the character at the current cursor position. Press SHIFT and then INS key to open a space at the current cursor position. Press this key to switch between the index display format and the data display format. [. . . ]