User manual CASIO SF-5580

[. . . ] SF-5580 SF-5780 SF-5980 Owner's Manual Q GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U. S. A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Input a value from 1 to 8 to specify a schedule type and return to the Schedule Keeper display. If you want to input only a start time, don't input anything for the end time (leave it the same as the start time). After you finish inputting the start and end time, press J to move to the alarm time. Use K and L to select the alarm time type and input an alarm time, if necessary. 35 36 While the alarm time is selected, pressing K and L selects one of three alarm types. This type of alarm is indicated when the first alarm time that appears is the same as the appointment start time input by you in step 7. This type of alarm is indicated when the first alarm time that appears is "-24:00". This type of alarm sounds 24 hours before the start time of the appointment start time input by you in step 7. When there is no time shown for the alarm time, it means that no alarm is set. After making the alarm time settings you want, press OK to move back to the schedule type. While the cursor is in the description text, press OK to store all the data. Note You must input a description. After that, you can skip any input by pressing OK without inputting anything. I Schedule Alarms An alarm sounds for 20 seconds and the corresponding Schedule Keeper data appears on the display. Note the following important points when you are using a Schedule Alarm. The snooze feature is applied to the same-day alarm also just like the Daily Alarm. The alarm indicator and time are automatically cleared after the alarm time is reached. If the alarm time is reached during data communications, the alarm does not sound until you complete the communications procedure. The alarm may fail to sound if battery power is too low. I How Schedule Keeper Data is Sorted The following shows how Schedule Keeper data is sorted within each date. By time within the same date(data without time comes first) I Schedule Type Labels and Icons Schedule Keeper Mode data includes an icon and a schedule type label. Initially, schedule types are labelled "SCH TYPE 1" through "SCH TYPE 8", and the initial default schedule type icon is . To change schedule type labels and icons 1. Use K and L to move the pointer to the schedule type you want to change. Skip this step if you don't want to change the label or if you want to wait until after you change the schedule type icon. 5. If you do not want to change the icon assigned to this schedule type, skip steps 5 through 7. When the icon you want is selected, press OK to register it and return to the schedule type menu. [. . . ] Then you can repeat the above procedure to send another item. I Sending All Data Items In a Mode The procedure you should use depends on whether the file whose data items you are sending has multiple files (Telephone Directory, Memo, To Do, Expense Manager) or not (Schedule, Reminder). 69 70 To send all data items from a multiple file mode (Telephone Directory, Memo, To Do, Expense Manager) 1. Display the initial screen of the mode that contains the data you want to send. Use K and L to move the pointer to the file whose data you want to send, and then use H and J to change the setting. Files set to "Yes" will be sent, while those set to "No" will not. [. . . ]