User manual CASIO PX-700 MIDI

[. . . ] PX-110/PX-310/PX-700 MIDI Implementation Contents Part I 1. 1 1. 2 1. 3 1. 4 1. 5 MIDI Message Overview Controller Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Sound Source Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Sound Source Common Sub-blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part Sub-blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Any message received that corresponds to a parameter whose number exceeds the number of parameters for the currently selected DSP is ignored. 11 8. 8 Format Damper (40H) Message Format: BnH 40H vvH n: MIDI Channel Number vv: Value Send Sent when the damper pedal is operated. For send values, see "25. 2 Damper Pedal Operation Value Table" in "VIII Setting Values and Send/Receive Values". Receive Receipt performs an operation equivalent to a damper pedal operation. The operation that corresponds to the received value depends on whether or not a piano tone (Piano Mode selected for the Part Mode) is selected. Piano Tones For a piano tone, attenuation speed is changed sequentially in accordance with the received value. For information of the range of values interpreted as on and the range of values interpreted as off, see "25. 1 Off/On Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". When it is selected, the depth of the resonance can be continually altered in accordance with the received value. When multiple parts are using Pedal Effect, however, the damper pedal values of each part are compared, and the largest one is used for Pedal Effect. 8. 9 Format Sostenuto (42H) Message Format: BnH 42H vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see the "25. 1 Off/On Setting Value Table" in "Part VIII Setting Values and Send/Receive Values. " Send Sent when sostenuto pedal of the damper pedal that has been assigned the sostenuto pedal function is operated. Receive Receipt performs an operation equivalent to a sostenuto pedal operation. 12 8. 10 Format Soft (43H) Message Format: BnH 40H vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see the "25. 1 Off/On Setting Value Table" in "Part VIII Setting Values and Send/Receive Values. " Send Sent when soft pedal of the damper pedal that has been assigned the soft pedal function is operated. Receive Receipt performs an operation equivalent to a soft pedal operation. 8. 11 Format Envelope Release Time (48H) Message Format: BnH 43H vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Release Time of the Patch Parameter. 8. 12 Format Envelope Attack Time (49H) Message Format: BnH 49H vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Attack Time of the Patch Parameter. 13 8. 13 Format Filter Cutoff (4AH) Message Format: BnH 43AH vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Filter Cutoff of the Patch Parameter. 8. 14 Format Filter Resonance (47H) Message Format: BnH 48H vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Filter Resonance of the Patch Parameter. 8. 15 Format Vibrato Rate (4CH) Message Format: BnH 4CH vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Vibrato Rate of the Tone Parameter. 14 8. 16 Format Vibrato Depth (4DH) Message Format: BnH 4DH vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Vibrato Depth of the Tone Parameter. 8. 17 Format Vibrato Delay (4EH) Message Format: BnH 4EH vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Vibrato Delay of the Tone Parameter. 8. 18 Format Reverb Send (5BH) Message Format: BnH 5BH vvH n: MIDI Channel Number vv: Value (Note1) Note 1: The setting value matches the value that is sent and received. Receive Receipt changes the Reverb Send of Mixer Part 1 through 16. 15 8. 19 Format Chorus Send (5DH) Message Format: BnH 5DH vvH n: MIDI Channel Number vv: Value (Note1) Note 1: The setting value matches the value that is sent and received. Receive Receipt changes the Chorus Send of Mixer Part 1 through 16. 8. 20 Format NRPN (62H, 63H) Message Format: BnH 62H vvH (LSB) BnH 63H vvH (MSB) n: MIDI Channel Number vv: Value 8. 20. 1 Format Filter Cutoff Message Format: BnH 62H 20H 63H 01H 06H mmH 26H **H n: MIDI Channel Number mm: Value (Note1) **: Ignored Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Filter Cutoff of the Tone Parameter. 8. 20. 2 Format Filter Resonance Message Format: BnH 62H 21H 63H 01H 06H mmH 26H **H n: MIDI Channel Number mm: Value (Note1) **: Ignored Note 1: For information about the relationship between setting values and send/receive values, see "25. 6 -64 - 0 - 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". 16 Send This message is not sent when the Instrument is operated. Receive Receipt changes the Filter Resonance of the Tone Parameter. 8. 21 Format RPN (64H, 65H) Message Format: BnH 64H vvH (LSB) BnH 65H vvH (MSB) n: MIDI Channel Number vv: Value 8. 21. 1 Format Pitch Bend Sensitivity Message Format: BnH 64H 00H 65H 00H 06H mmH 26H **H n: MIDI Channel Number mm: Value 024 (Note1) **: Ignored Note 1: The setting value matches the value that is sent and received. Receive Receipt changes Pitch Bend Sensitivity. 8. 21. 2 Format Fine Tune Message Format: BnH 64H 01H 65H 00H 06H mmH 26H llH n: MIDI Channel Number mm: Value MSB(Note1) ll: Value LSB(Note1) Note 1: For information about the relationship between setting values and send/receive values, see "25. 8 -99 - 0 - 99 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". [. . . ] 0FFFFFFFF 20202020 MSB is leading character. 49 Part VI Parameter Set List This list shows the parameter sets that can be transferred using System Exclusive Message Bulk Dump. 21 SMF Parameter Set (PX-310) Field Value F0 44 11, 03 00 to 1F, or 7F 04(HDS), 05(HDR), 07(Control) SMF = 10 System Exclusive Format 01 02 03 04 05 06 07 08 09 10 11 12 13 SYSEX MAN MOD dev act cat prm 00-7F ilen/dlen See "Part IV PX-110/PX-310/PX-700 System Exclusive Message". See "PX-110/PX-310/PX-700 Instrument System Exclusive Messages". See "PX-110/PX-310/PX-700 Instrument System Exclusive Messages". See "PX-110/PX-310/PX-700 Instrument System Exclusive Messages". [. . . ]