User manual CASIO PEDAL UNIT SP-32 ASSEMBLY STAND
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CASIO PEDAL UNIT SP-32. We hope that this CASIO PEDAL UNIT SP-32 user guide will be useful to you.
 |
CASIO PEDAL UNIT SP-32 ASSEMBLY STAND: Download the complete user guide (1507 Ko) |
Manual abstract: user guide CASIO PEDAL UNIT SP-32ASSEMBLY STAND
Detailed instructions for use are in the User's Guide.
[. . . ] It is up to you to prepare a large Phillips head (+) screwdriver for assembly. [. . . ] SP-32 Insert the screws that come with the SP-32 Pedal Unit from the outside of the side panels and temporarily tighten the angle brackets in place. 4 Loosen the screws of the panel brackets at the bottom of the side panels (two screws each panel, four total). 4 Remove the bracket screws from the inside surfaces of the side panels (two screws each panel, four total) and then shift the position of the brackets as shown in the figure. 1-a Replace the screws you removed in step 1-a above and temporarily tighten the brackets in place. Remove the bracket screws from the inside surfaces of the side panels (two screws each panel, four total). Mount the pedal unit onto the angle brackets you installed in step 2 of this procedure. [. . . ] 2 Note that you must install the two clips on the side panel of the stand as shown in the illustration. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CASIO PEDAL UNIT SP-32
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CASIO PEDAL UNIT SP-32 will begin.