User manual CASIO G-SHOCK

[. . . ] MO0911-EA Operation Guide 5081 Getting Acquainted Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to read this manual carefully. €¢ Button operations are indicated using the letters shown in the illustration. €¢ Each section of this manual provides you with the information you need to perform operations in each mode. [. . . ] To measure times with the stopwatch Elapsed Time D Start ➤ D Stop ➤ A Reset • While an elapsed time measurement operation is being performed in the Stopwatch Mode, the watch will display a speed value, which is calculated based on the distance you specified and the elapsed time. The speed is indicated by the upper right dial, two indicators (1000 and MACH), and the speed hand. Example: At a speed of 1, 740, the upper right dial indicates 1000 and MACH is displayed. Lap Time D Start ➤ A Lap (Lap01) ( LAP displayed) ➤ A Lap (Lap02) ➤ D Stop ➤ A Reset Split Time D Start ➤ A Split ➤ A Split release ➤ D Stop ➤ A Reset ( SPL displayed) Countdown Timer L A Auto-repeat off Start time (Hours Minutes) Seconds Minutes) Auto-repeat on You can set the countdown timer start time within a range of one minute to 24 hours. €¢ You also can select auto-repeat, which automatically restarts the countdown from the original value you set whenever zero is reached. €¢ All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C. To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer. €¢ When the end of the countdown is reached, the alarm will sound for 10 seconds or until you stop it by pressing any button. €¢ The countdown time is reset to its starting value automatically after the alarm stops if auto-repeat is turned off. €¢ When auto-repeat is turned on, the countdown will restart automatically without pausing when it reaches zero. €¢ The countdown timer measurement operation continues even if you exit the Countdown Timer Mode. • Press D while a countdown operation is in progress to pause it. €¢ Alarm and Hourly Time Signal operations are performed in accordance with the current time in your Home City, as kept in the Timekeeping Mode. €¢ To stop the alarm tone after it starts to sound, press any button. €¢ Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen Displaying the SNZ setting screen • All of the operations in this section are performed in the World Time Mode, which you enter by pressing C. Snooze Alarm on alarm indicator indicator To view the current time in another time zone In the World Time Mode, use D to scroll through available city codes (time zones). €¢ The lower left display shows the current time in the World Time City. €¢ Between the noon and midnight in the World Time Mode, a PM indicator (PM) appears above the hour digits in the lower left display. €¢ When the city code (time zone) you want is selected, you can press A to display the date. After about one second, the watch will resume regular timekeeping for the currently selected city. €¢ Turning on a alarm (AL1, AL2, AL3, AL4 or SNZ) displays the alarm on indicator on its Alarm Mode screen. [. . . ] Auto Return Features • If you leave the watch with a flashing setting on the display for two or three minutes without performing any operation, the watch will exit the setting mode automatically. €¢ The watch will return to the Timekeeping Mode automatically if you do not perform any operation for two or three minutes in the Alarm Mode. Initial Screens When you enter the Stopwatch Mode, World Time Mode or Alarm Mode, the data you were viewing when you last exited the mode will appear first. €¢ Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. [. . . ]