User manual CASIO EXILIM EX-Z90,MV

[. . . ] E Digital Camera User’s Guide Thank you for purchasing this CASIO product. € Before using it, be sure to read the precautions contained in this User’s Guide. € For the most up-to-date information about this product, visit the official EXILIM Website at http://www. 1 Unpacking As you unpack your camera, check to make sure that all items shown below are included. [. . . ] € Images created using MOTION PRINT – Protected images • To delete audio, perform the following operation: Dubbing * Delete * [SET] * [MENU]. € Note that you cannot restore the original audio of an Audio Snapshot after you delete or re-record it. In the PLAY mode, use [4] and [6] to scroll through the images until the Audio Snapshot you want is displayed. 107 Other Playback Functions (PLAY) Voice Recording Playback Controls Fast forward/fast reverse Play/pause Volume adjustment Display content switching Stop playback [4] [6] [SET] Press [2] and then press [8] [2] [8] (DISP) [MENU] • Audio of an Audio Snapshot also can be played back on a computer with Windows Media Player or QuickTime. Copying Files (Copy) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy Files can be copied from the camera’s built-in memory to a memory card or from a memory card to built-in memory. Built-in * Card Copies all files from built-in camera memory to a memory card. Copies a single file on the memory card to camera built-in camera memory. Files are copied to the folder in built-in memory whose name has the largest serial number. Card * Built-in NOTE • You can copy snapshots, movies, audio snapshots, or Voice Recording files you recorded with this camera. € When a copied image appears on the full-month calendar screen, it is displayed on the date that it was copied (page 90). 108 Other Playback Functions (PLAY) Dynamic Photo You can use the procedures in this section to crop either a moving subject or a still subject out of a snapshot and then insert it into another snapshot. Moving Subject Other Image Dynamic Photo Image To create a subject image to be inserted (Dynamic Photo) 1. Press [SET], use [8] and [2] to select “Subject Type”, and then press [SET]. CS speed Number of Shots 20 shots 20 shots 20 shots 1 shot Subject type Records multiple images of the subject, which are cropped and combined to create movement against the background image. Records a single subject, which is cropped and inserted into the background image. Moving Subject 1sec (20fps) Moving Subject 2sec (10fps) Moving Subject 4sec (5fps) Still Subject 20 images per second 10 images per second 5 images per second – • To create a still subject, select “Still Subject”. Press [SET], use [8] and [2] to select “Number of Shots”, and then press [SET]. Use [8] and [2] to select either “1” or “2” and then press [SET]. To shoot under these conditions: Select this option: You need to shoot twice to extract the subject. If you select this option, you will not need to perform steps 7 and 8 of the procedure below. 2 1 The subject against a complex background The subject against a plain (no pattern) background 6. If you selected “2” for the “Number of Shots” setting, the images should include some easily identifiable reference point that you can use for later alignment in step 7 below. [. . . ] € “Moving Subject 4sec (5fps)” provides more recording time, but subject movement is slightly rough. Records a single subject, which is cropped and inserted into the background image. Moving Subject 4sec (5fps) 5 frames per second 20 images Still Subject – 1 image Changing the “Number of Shots” Setting Normally you need to shoot the subject you want to extract against a background and then shoot the background again without the subject. When the subject is against a plain background, however, you can extract the subject after shooting only once. [. . . ]