User manual CASIO EXILIM EX-S3

[. . . ] E Digital Camera EX-S3 User's Guide Thank you for purchasing this CASIO Product. Before using it, be sure to read the precautions contained in this User's Guide, and keep the User's Guide in a safe place for future reference. K856PCM1DMX INTRODUCTION INTRODUCTION Unpacking Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible. PHOTO CHAR GE USB Camera Rechargeable lithium ion battery (NP-20) USB Cradle (CA-22) Strap * Loaded in the camera when you purchase it. CD-ROM USB Cable Dummy card Basic Reference · Note that the shape of the AC adaptor depends on the area where you purchased the camera. * The shape of the AC power cord plug varies according to country or geographic area. Special AC Adaptor (Inlet Type) AC power cord * Special AC Adaptor (Plug-in Type) 2 INTRODUCTION Contents 2 INTRODUCTION Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · The supplied strap is intended for use with this camera only. · Never swing the camera around by the strap. PHOT O CHAR GE USB [CHARGE] lamp 24 GETTING READY Power Requirements Your camera is powered by a rechargeable lithium ion battery (NP-20). 3. Swing the battery cover closed, and then slide it in the direction indicated by the arrow while pressing down on it. To load the battery 1. Pressing the battery cover on the side of the camera, slide it in the direction indicated by the mark and then swing it open. IMPORTANT!· Use only the special NP-20 rechargeable lithium ion battery to power this camera. Align the arrow mark on the battery with the arrow mark on the camera as shown in the illustration, and slide the battery into the battery compartment. Arrow marks · To remove the battery, open the battery cover. Taking care that the battery does not suddenly fall out of the camera, tilt the camera towards the side. You need to charge the battery before using the camera for the first time (page 26). NP-20 25 GETTING READY To charge the battery NOTE · The bundled AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC. Note, however, that the shape of the AC power cord plug varies according to country or geographic area. If you plan to use the AC adaptor in a geographic area where the power receptacle shape is different from that in your area, replace the AC power cord with one of the other ones that comes with the camera, or purchase a commercially available AC power cord that is compatible with the power outlets in that area. 1. Connect the bundled AC adaptor to the [DC IN 5. 3V] connector of the USB cradle, and then plug it in to a household power outlet. · Note that the shape of the AC adaptor depends on the area where you purchased the camera. USB Cradle [DC IN 5. 3V] AC Adaptor USB Cradle AC Adaptor [DC IN 5. 3V] AC power cord 26 GETTING READY NOTE · The AC adaptor is designed for operation on power ranging from 100V AC to 240V AC. Note, however, that the shape of the power cord plug varies according to country or geographic area. It is up to you to find out if the shape of the AC adaptor power cord plug is compatible with local power outlets when traveling abroad. Actual charging time depends on current battery capacity and charging conditions. · Use only the USB cradle (CA-22) or the optionally available charger unit (BC-10L) to charge the special NP-20 rechargeable lithium ion battery. Do not use optionally available AD-C40, AD-C620 and AD-C630 AC adaptors with this camera. · Make sure that the camera connector of the USB cradle is securely inserted into the camera's connector as far as it will go. · The [CHARGE] lamp may remain amber colored and the charge operation may not start right away if you try to charge immediately after using the camera (which causes battery to become warm) or when it is too hot or too cold where you are performing the charge operation. If this happens, simply wait until the battery reaches normal temperature. The [CHARGE] lamp will turn red and charging will start when the battery temperature returns to the allowable charging temperature range. 2. Set the camera onto the USB cradle. · Do not place the camera onto the USB cradle while it is turned on. · The [CHARGE] lamp on the USB cradle should turn red, indicating that charging has started. [. . . ] 0. 8 meter to 2 meters (2. 6´ to 6. 6´) (ISO Sensitivity : "Auto") · The flash takes anywhere from a few seconds as long as 10 seconds to attain full charge after being fired. The actual time required depends on the battery level, temperature, and other conditions. · The flash unit may not be able to charge when battery power is low. Low battery power is indicated by the on the monitor screen, and when the flash fails to fire properly resulting in poor image exposure. [. . . ]