User manual CASIO EXILIM EX-Z250

[. . . ] E Digital Camera User's Guide K1124PCM2DMX Thank you for purchasing this CASIO product. · Before using it, be sure to read the precautions contained in this User's Guide. · Keep the User's Guide in a safe place for future reference. · For the most up-to-date information about this product, visit the official EXILIM Website at http://www. exilim. com/ 1 Unpacking As you unpack your camera, check to make sure that all items shown below are included. [. . . ] Red eye correction corrects the eye colors of subjects to their normal colors when red eye occurs while using the flash. Turns off red eye correction. NOTE · The original snapshot is retained in memory and not deleted. · Red eye correction may not be possible in the case of small faces or profiles. · Red eye correction may not produce the desired effect under certain conditions. 91 Other Playback Functions (PLAY) Adjusting White Balance (White Balance) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * White Balance You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image. ¤ Daylight ' Overcast " Shade Day White Outdoors, fair weather Outdoors, cloudy to rain, in tree shade, etc. White or daywhite fluorescent lighting, without suppressing color cast Daylight fluorescent lighting, while suppressing color cast Suppressing of the appearance of light bulb lighting No white balance adjustment Fluorescent ­ Daylight Fluorescent « Tungsten Cancel NOTE · You also can adjust the white balance when recording images (page 75). · When you display an altered image on the camera's monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered. 92 Other Playback Functions (PLAY) Adjusting the Brightness of an Existing Snapshot (Brightness) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Brightness You can select one of five brightness levels, from +2 (brightest) to ­2 (least bright). NOTE · The original snapshot is retained in memory and not deleted. · When you display an altered image on the camera's monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered. Keystone Correction (Keystone) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Keystone You can use keystone correction to correct rectangular and square shapes in a snapshot that do not appear normal because they were not shot straight on. 2. Use [4] and [6] to select the shape in the snapshot that you want to correct. Use [8] and [2] to select "Correct" and then press [SET]. NOTE · If the original image is smaller than 2M (1600x1200 pixels) size, the new (corrected) version will be the same size as the original. · When you display an altered image on the camera's monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered. 93 Other Playback Functions (PLAY) Using Color Correction to Correct the Color of an Old Photograph (Color Correction) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Color Correction Color Correction lets you correct the color of an old photograph. The corrected image is saved as 2M (1600x1200 pixels) size. 1. Perform the above operation. · An image of the photograph you are restoring will appear on the monitor screen with a red boundary around it. If there is a black boundary, it means that the camera detected more than one rectangular area in the image. Use [4] and [6] to move the boundary and select the area of the photograph. 2. 4. Use [8] and [2] to select "Trim", and then press [SET]. This will display a selection boundary for trimming the on-screen image. Slide the zoom controller to resize the selection boundary and specify the image size you want. Use [8], [2], [4], and [6] to move the selection boundary to it encloses the area of the image you want to trim to and then press [SET]. NOTE · If the original image is smaller than 2M (1600x1200 pixels) size, the new (corrected) version will be the same size as the original. · If you do not want a border around the resulting image, select an area that is smaller than the original image. · When you display a color corrected image on the camera's monitor screen, the date and time indicates when the image was originally recorded, not when the image was color corrected. 94 Other Playback Functions (PLAY) Selecting Images for Printing (DPOF Printing) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing See page 104 for details. Protecting a File Against Deletion (Protect) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Protect Protects specific files. 1Use [4] and [6] to scroll through the files On until the one you want to protect is displayed. To unprotect a file, select "Off" instead of "On" in step 2 above. Protects all files. All Files: On 1Use [8] and [2] to select "All Files: On" and then press [SET]. 2Press [MENU]. To unprotect all files, select "All Files: Off" instead of "All Files: On" in step 1 above. IMPORTANT! · Note that even if a file is protected, it will be deleted if you perform the format operation (page 135). 95 Other Playback Functions (PLAY) Editing the Date and Time of an Image (Date/Time) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Date/Time [8] [2] Changes the setting at the cursor location [4] [6] Moves the cursor between settings [BS] Toggles between 12-hour and 24-hour format When the date and time settings are what you want, press [SET] to apply them. NOTE · The date and time stamped into an image using the Time Stamp (page 130) cannot be edited. · You cannot edit the date and time of an image that is protected. · You can input any date from 1980 to 2049. Rotating an Image (Rotation) Procedure [p] (PLAY) * Snapshot or Movie Screen * [MENU] * PLAY Tab * Rotation 1. [. . . ] Image compression could not be performed for some reason during image data storage. Contact your retailer or an authorized CASIO authorized service center. The LOCK switch of the SD or SDHC memory card loaded in the camera is in the locked position. You cannot store images to or delete images from a memory card that is locked. LOCK The card is locked. [. . . ]