User manual CASIO EX-S1

[. . . ] Digital Camera EX-S1/EX-M1 User's Guide Thank you for purchasing this CASIO Product. Before using it, be sure to read the precautions contained in this User's Guide, and keep the User's Guide in a safe place for future reference. All the illustrations in this manual show the EX-M1. See the text that accompanies the illustrations for information about how the EX-S1 and EX-M1 differ from each other. E EX-M1 INTRODUCTION INTRODUCTION Unpacking Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible. Camera Rechargeable lithium ion battery (NP-20) USB Cradle Special AC Adaptor EX-M1 AC power cord * Strap CD-ROM Special USB Cable Dummy Card LCD Remote Controller Stereo Headphones Basic Reference Rechargeable Lithium Ion Battery User's Guide * Comes with EX-M1 only * Comes with EX-M1 only * The shape of the AC power cord plug varies according to country or geographic area. [. . . ] Press MENU. Settings Selection cursor (indicates the currently selected item) 30 GETTING READY 3. Rock the controller left or right to select the tab you want, and then rock it down to move the selection cursor from the tab to the settings. · If you ever need to move the selection cursor back from the settings to the tabs, rock the controller up until the cursor reaches the top of the menu. 6. Next, do either of the following. If you want to do this: Apply the setting and exit the menu screen Apply the setting and return to menu screen to change other settings Do this: Click the controller. Rock the controller up or down to select the setting you want to change, and then rock the controller to the right. · This displays a submenu of options available for the selected setting. · Instead of rocking the controller, you could also click it. Example: "Flash" setting selected. · See "Menu Reference" on page 104 for more information about menus. 5. Rock the controller up or down to select the option you want, and then click. 31 GETTING READY Configuring Display Language and Clock Settings Be sure to configure the following settings before using the camera to record images. · Display language · Date and time Note that the current date and time settings are used by the camera to generate the date and time that are stored along with image data, etc. IMPORTANT!· The camera's clock settings are cleared whenever power is totally cut off. This can happen if the battery goes dead while the camera is not being supplied power by the USB cradle. The clock setting screen will appear automatically the next time you turn on power after the settings are cleared. · The current date and time settings will be cleared if the battery remains dead without being charged for about one day. · Recording images without configuring the clock settings causes incorrect time information to be registered. Be sure to configure the clock settings before using the camera. 32 GETTING READY 1. Rock the controller up or down to select the language you want. : Japanese English : English Français : French Deutsch : German Español : Spanish Italiano : Italian 4. Set the date and the time. To do this: Move the cursor between settings Change the setting at the current cursor location Do this: Rock the controller left or right. Click to register the language setting and advance to the clock settings. 5. Click to register the clock settings and exit the setting screen. 33 BASIC IMAGE RECORDING BASIC IMAGE RECORDING 3. Compose the image on the monitor screen. · The focusing range of the camera is approximately 1 meter to infinity (). · When performing this step, take care so your fingers do not block the lens or any of the sensors. · You can compose images using either the monitor screen or the optical viewfinder. Power button 12 1600 1200 NORMAL This section describes the basic procedure for recording an image. Recording an Image Your camera automatically adjusts shutter speed in accordance with the brightness of the subject. · You can also use optionally available SD memory cards and MultiMedia Cards (MMC) to store images (page 74). 02/12/24 12:58 1. Press the power button to turn on the camera. · This causes an image or a message to appear on the monitor screen. · When using the optical viewfinder, you can turn off the monitor screen to save power (page 50). 4. [. . . ] · Keep the microphone on the front of the camera pointed at the subject. · Take care that you do not block the microphone with your fingers. Microphone 1. In the PLAY mode, rock the controller left or right to scroll through snapshots until the one whose audio you want to re-record is displayed. 2. Select the "PLAY" tab, select "Dubbing", and then rock the controller to the right. 3. [. . . ]