User manual CASIO 2866

[. . . ] MO0312-EA Operation Guide 2866 2867 Getting Acquainted Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to carefully read this manual and keep it on hand for later reference when necessary. Expose the watch to bright light to charge its battery before using it. You can use this watch even as its battery is being charged by exposure to bright light. [. . . ] In the Timekeeping Mode, hold down A until the city code setting starts to flash, which indicates the setting screen. Use A or C to move the flashing in the sequence shown below to select other settings. Press C. C City/Transmitter Settings City Code Press A. Transmitter Mode DST Time/Date Settings 12/24-Hour Format Power Saving C Seconds Day Hour Month Minutes Year 3. When the setting you want to change is flashing, use B and/or D to change it as described below. City/Transmitter Settings Screen: BER qvtA DST To do this: Do this: Change the city code Change the transmitter mode (qvtA, DCF, MSF, or OFF) Toggle between Daylight Saving Time (ON) , Standard Time (OFF), or Auto DST (AUtO) Use D (east) and B (west). Press D. AUtO · See "City Code Table" for a complete list of available city codes. · The transmitter mode setting is always OFF and cannot be changed whenever the city code setting is anything other than LON, PAR, BER, or ATH. Time/Date Settings Screen: 12H P To do this: Do this: 10:58 50 '04 Toggle between 12-hour (12H) and 24-hour (24H) timekeeping Reset the seconds to 00 Change the hour or minutes Change the year, month, or day Press D. Use D (+) and B (­). 6x30 PS ON Toggle power saving on (ON) and off Press D. · If a City/Transmitter Setting screen is displayed, press A twice. Note · The "Transmitter Mode" setting specifies the time calibration signal transmitter mode, or turns auto receive off. · Auto DST (AUtO) can be selected only while LON, PAR, BER, or ATH is selected as the Home City code. For more information, see "Daylight Saving Time (DST)" below. Daylight Saving Time (DST) Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. The time calibration signals transmitted from Rugby and Mainflingen include both Standard Time and DST data. When the Auto DST setting is turned on, the watch switches between Standard Time and DST (summer time) automatically in accordance with the received time signal. · The default DST setting is Auto DST (AUtO) whenever you select LON, PAR, BER, or ATH as your Home City code. · If you experience problems receiving the time calibration signal in your area, it is probably best to switch between Standard Time and Daylight Saving Time (summer time) manually. (SPL displayed) D Stop Second runner finishes. B Split release Display time of second runner. B Clear 3 Operation Guide 2866 2867 To change the Daylight Saving Time (summer time) setting 1. In the Timekeeping Mode, hold down A until the city code setting starts to flash, which indicates the setting screen. Use D to cycle through the DST settings in the sequence shown below. Auto DST (AUtO) DST off (OFF) DST on (ON) Battery Power Indicator and Recover Indicator The battery power indicator on the display shows you the current status of the rechargeable battery's power. Level 1 Battery Power Indicator Function Status All functions enabled. Battery power indicator 2 4. When the setting you want is selected, press A twice to exit the setting screen. All functions enabled. Backlight The backlight uses an EL (electro-luminescent) panel that Auto light switch on indicator causes the entire display to glow for easy reading in the dark. [. . . ] Press C seven times until the Power Saving on/off |||| screen appears. on indicator · The Power Saving on indicator (SAVE) is on the display in all modes while the Power Saving is turned on. |||| |||| Backlight Precautions · The electro-luminescent panel that provides illumination loses power after very long use. · The illumination provided by the backlight may be hard to see when viewed under direct sunlight. · The watch may emit an audible sound whenever the display is illuminated. [. . . ]