User manual CASIO 2747

[. . . ] With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all modes. Digital Time Daylight Saving Time (DST) Setting Daylight Saving Time (summer time) advances the digital time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. Press A. Day of week PM indicator Hour : Minutes Month ­ Day Digital Time and Date Use the Timekeeping Mode to set and view a digital display of the current time and date. When setting the digital time, you can also configure settings for summer time (Daylight Saving time or DST). To set the digital time and date 1. [. . . ] While DST On/Off setting is selected (flashing), press D to toggle between Daylight Saving Time (ON) and Standard Time (OFF). While the hour or minutes setting is selected (flashing), use D (+) and B (­) to change it. Press A to exit the setting screen. You can input spaces, alpha characters, symbols, and numbers in a name. When the character you want is at the cursor position, press C to move the cursor to the right. After you input the name, press C as many times as necessary to move the cursor to the number field. You tell when you are in the name field because of the long cursor ( _). The name field has spaces for eight characters, so you must press C to move the past the 8th character in order to get to the number field. Pressing C until the cursor moves past the 16th digit causes it to jump back to the first character of the name field. Use D and B to change the character at the cursor position in the number field. (space) to To view the time in another city code In the World Time Mode, press D to scroll through city codes. To toggle a city code time between Standard Time and Daylight Saving Time 1. In the World Time Mode, use D to display the city code whose Standard Time/Daylight Saving Time setting you want to change. Hold down A until the DST On/Off setting of the world time starts to flash, which indicates the setting screen. Press D to toggle between Daylight Saving Time (ON displayed) and Standard Time (OFF displayed). Press A to exit the setting screen. The DST indicator appears on the World Time Mode display to indicate that Daylight Saving Time is turned on. The above operation toggles all World Time city codes between Daylight Saving Time and Standard Time. Note that you cannot make settings for individual city codes. Alarms AM indicator 8. When the character you want is at the cursor position, press C to move the cursor to the right. Press A to store your data and return to the Telememo record screen (without the cursor). After you press A to store data, the name flashes for about one second to indicate that records are being sorted. Note that a record must have something input in the name field, otherwise you will not be able to store it. Alarm time (Hour : Minutes) You can set three independent Daily Alarms. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. [. . . ] The countdown time is automatically reset to its starting value after the alarm stops. · Press D while a countdown operation is in progress to pause it. · To completely stop a countdown operation, first pause it (by pressing D), and then press A. · The countdown timer measurement operation continues even if you exit the Countdown Timer Mode. Stopwatch Seconds 1/100 second City Code Table The stopwatch lets you measure elapsed time, split times, and two finishes. · The display range of the stopwatch is 23 hours, 59 minutes, 59. 99 seconds. [. . . ]