User manual CARVER 2866 SANTA CRUZ
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CARVER 2866 SANTA CRUZ. We hope that this CARVER 2866 SANTA CRUZ user guide will be useful to you.
Manual abstract: user guide CARVER 2866 SANTA CRUZ
Detailed instructions for use are in the User's Guide.
[. . . ] IF YOU LEAVE A FIREARM AND AMMUNITION WITHIN EASY ACCESS OF A CHILD, YOU MAY BE SUBJECT TO FINE, IMPRISONMENT OR BOTH. KEEP FIREARMS AND AMMUNITION LOCKED UP USE TRIGGER LOCKS. " .
CALIFORNIA:
WARNING: CHILDREN ARE ATTRACTED TO AND CAN OPERATE FIREARMS THAT CAN CAUSE SEVERE INJURIES OR DEATH. PREVENT CHILD ACCESS BY ALWAYS KEEPING GUNS LOCKED AWAY AND UNLOADED WHEN NOT IN USE. IF YOU KEEP A LOADED FIREARM WHERE A CHILD OBTAINS AND IMPROPERLY USES IT, YOU MAY BE FINED OR SENT TO PRISON.
MARYLAND:
"WARNING: CHILDREN CAN OPERATE FIREARMS WHICH MAY CAUSE DEATH OR SERIOUS INJURY. [. . . ] (WARNING: Wear safety glasses when disassembling the magazine -- the magazine spring is under tension and could cause serious eye injury if released suddenly. )
WARNING: LEAD EXPOSURE
DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING FIREARMS, OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO LEAD AND OTHER SUBSTANCES KNOWN TO CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM, AND OTHER SERIOUS PHYSICAL INJURY. AVOID EATING, HANDLING FOOD AND TOUCHING YOUR FACE AND EYES WHILE HANDLING OR CLEANING FIREARMS.
GENERAL INFORMATION
THE . 357, . 41, . 44, . 50 AE AND THE . 440 COR®BON DESERT EAGLE ARE GAS-OPERATED, SEMI-AUTOMATIC PISTOLS. THE DESERT EAGLE IS UNIQUE IN ITS CLASS AND REPRESENTS A NEW FUNCTIONAL APPROACH IN HANDGUNS. IN ADDITION TO ITS HIGH ACCURACY, IT OFFERS THE CONVENIENCE OF FIRING STANDARD RIMMED . 357, . 41, . 44, . 440 COR®BON OR . 50 AE CARTRIDGES, WHICH ARE WIDELY AVAILABLE.
14
GENERAL CHARACTERISTICS
· A safety catch, operable from either side, blocks the firing pin and at the same time disconnects the trigger from the firing mechanism. The pistol chamber is chrome plated to facilitate easier cartridge case extraction. The polygonal rifling reduces barrel wear and enhances the seal between the bullet and the bore, thus increasing accuracy. Field stripping is simple since the pistol has only six main parts, including the magazine. · Anatomically formed grip, ideal hand seating angle and comfortable grip dimensions permit rapid, accurate, instinctive shooting. Most parts are manufactured by precision casting and machining to strict military standards and with the `traditional Israel Weapons Industries' dedication to quality and durability. In addition, the following sights may be used: -- Fully adjustable rear sight with target-type front sight. (Optional)
·
·
·
·
·
·
·
·
·
15
Desert Eagle Pistol Specifications
Mark VII . 357 Magnum
Length, with 6-inch barrel Length, with 10-inch barrel Height Width Trigger reach Sight radius (with 6-inch barrel) Weight w/empty magazine (6--inch) Polygonal rifling (right-hand twist) Magazine capacity Bore diameter 10. 48 inches (266 mm) 14. 75 inches (375mm) 6. 1 inches (155 mm) 1. 25 inches (32 mm) 2. 75 inches (70 mm) 8. 5 inches (215 mm) 1783. 19 grams (3 lbs. It should be noted that due to the above features, it is not possible to engage the sear when the bolt is not locking properly. Due to the unique blocking of the firing pin by the safety, the pistol will not fire when dropped accidentally on its hammer or on its muzzle when the safety is properly engaged (on "SAFE").
fig. Pull hammer slightly to the rear until a click is heard; the hammer is now in semi-cocked position. Move the front end of the safety catch lever down into the "SAFE" position. Press the magazine release button on the left hand side of the pistol and remove the magazine (fig. Draw the slide to the rear, check the chamber visually to ensure that the pistol is unloaded and release the slide. Point the pistol in safe direction and pull the trigger to check whether the safety is working properly (the hammer should not move). Move the safety lever up into the "FIRE" position; a red dot will be visible. Pull the hammer into semi-cocked position and move the safety catch lever into the "SAFE" position.
20
fig. With the magazine in an upright position, place the cartridge rim on the magazine follower, in front of the magazine lips (fig. Repeat until loaded (9 cartridges . 357; 8 cartridges . 41/. 44; 7 cartridges . 440/. 50AE). [. . . ] Oil lightly all other parts of the pistol, reassemble it (see page 28) and make sure it functions properly. NOTE: After firing, use the gas cylinder cleaning tool to remove deposits from gas cylinder underneath the barrel assembly. The cleaning tool should rotate freely from side to side in the gas cylinder when clean. DO NOT use any other tool for this operation since this may damage the cylinder. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CARVER 2866 SANTA CRUZ
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CARVER 2866 SANTA CRUZ will begin.