User manual CANON SELPHY CP760

[. . . ] The images printed with this product should be intended for personal use. Do not print images that infringe upon copyright laws without the prior permission of the copyright holder. This product's warranty is only effective in the country of sale. If there is a problem with the printer while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. [. . . ] You do not need to repeat the settings for each image because once the settings are made, they are applied for all images. Press the l r buttons to change the settings, then press Pressing the v button again will restore the image Refer to pp. You can print the shooting date recorded by the Turning off SELPHY will return the setting to [ Off]. Since the date printed will be the date the image was recorded by the digital camera, it cannot be changed on SELPHY. The level of correction will change depending on the page layout and paper size. off (Default setting) / On Portions other than the eyes may be mistakenly corrected. If SELPHY is turned off or the memory card is removed, the setting will return to [ Off]. You can change the order of the printed date mm/dd/yy (Default Setting), dd/mm/yy, yy/mm/dd The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot. If you connect your computer to SELPHY and use the supplied software, you can view all images at once and take advantage of various printing functions that cannot be done with just SELPHY alone. Following the audio guidance will allow inexperienced computer users to print easily. Select favorite images from the index and print You can select images you wish to print from an index, and print them all at You can add frames or stamps to your images and print. When all printing is finished, click When all printing is finished, click Audio guidance may not play properly on some computers. If the audio guidance is difficult to hear, follow these steps to turn it off before using the software. While in the screen from Step 1 in "Using the Software to Audio guidance turns off. You can select and print images from a digital camera that supports the PictBridge standard. A Canon brand compact digital camera will be used as an example to explain the print method. If operations are different for the digital camera you use, refer to the user guide included with your digital camera. Make sure that a memory card is not inserted in SELPHY, and it is not connected to a computer. Connect SELPHY to the digital camera using the interface cable (USB cable) included with the digital camera. First turn on SELPHY, then turn on the digital camera and play back the images on the digital camera. Perform the necessary operations on your digital camera to select an image for printing. After printing has completed, turn off SELPHY and the digital camera , then unplug the cable. [. . . ] In the event that condensation does form within SELPHY, keep it at room temperature until the water droplets evaporate naturally before use. Never wipe using volatile solvents such as benzine, paint thinner, or diluted neutral solvent. Portions of the code used in this firmware are based in part on the work of the Independent JPEG Group. Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. [. . . ]