User manual CANON POWERSHOT ELPH 330 HS SPRING/SUMMER 2013 DIGITAL CAMERA & CAMCORDER FULL LINE PRODUCT GUIDE

[. . . ] The LCD monitor will automatically turn off when it clicks shut against the camera body. 3 Setting the Date/Time 1. Use the or button to select an item and the or button to change its value (b). Confirm that the correct time is displayed and press the FUNC. /SET button (c). · A rechargeable lithium battery is built into the camera to save such settings as the date/time. [. . . ] 37) You can freely select camera settings such as the exposure and Creative aperture value to suit your shooting purposes. · In , , or mode, the ISO speed may increase and cause noise in the image depending on the scene being shot. · In mode, shoot with the subject 1 m (3. 3 ft. ) or more from the end of the lens. · To shoot underwater, install the camera in Waterproof Case WP-DC90 (sold separately). · We recommend you use Waterproof Case WP-DC90 (sold separately) for shooting at ski resorts or beaches. Using the Zoom 1. The zoom can be adjusted from 35 mm ­ 140 mm (focal length) in 35mm film equivalent terms. Wide Angle: Zooms out from the subject. With the red-eye reduction function on: With the red-eye reduction function off: Flash settings cannot be used in some shooting modes. Auto with red-eye reduction Auto Flash on with redeye reduction Flash on Flash off The flash fires automatically and fires the redeye reduction lamp each time. Shooting * Red-eye reduction: This feature reduces the effect of light reflecting back from the eyes and making them appear red. menu. You are recommended to shoot with the camera attached to a tripod or other device if the camera shake warning icon appears. This helps brighten up dark backgrounds when shooting night scenes or with indoor lighting conditions. See the Advanced Guide: Rec. 24) See the Advanced Guide: Functions Available in Each Shooting Mode (p. Place the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. Double-click the [Canon Digital Camera Installer] icon in the CD-ROM window. Click the Digital Camera Software [Install] button and click [Next]. 3. Proceed with the installation while reviewing installation settings. 4. When the installation is complete, select [Yes, I want to restart my computer now. ] and click [Finish]. Remove the Canon Digital Camera Solution Disk from the CD-ROM drive after restarting. 2. Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal. Slip your fingernail under the left edge of the camera's terminal cover, lift it open and plug the interface cable in all the way. USB Port DIGITAL Terminal Interface Cable Interface Cable 2. Set the camera's mode switch to (playback) and turn on the power. The camera and computer will be able to communicate. Always grasp the sides of the connector when disconnecting the interface cable from the camera's DIGITAL terminal. Downloading Images to a Computer If the Digital Signature Not Found window appears, click [Yes]. The USB driver will automatically finish installing onto the computer when you attach the camera and open a connection. 19 Downloading Images to a Computer A window allowing you to set the preferences will appear when a connection is established between the camera and computer. 1. [. . . ] Select , or button. and press the · The images will download. The display will return to the Direct Transfer menu when the download is complete. · To cancel the download, press the FUNC. /SET button. 22 Select & Transfer/Wallpaper 2. Select images to download and press the · The images will download. [. . . ]