User manual CANON PIXMA MP830 OFFICE ALL-IN-ONE START HERE

[. . . ] You have a dedicated telephone line for fax use only: FAX only You receive mainly voice calls and sometimes faxes, and you want to receive faxes manually: Manual RX (2) Press [OK]. 2 Unlock the Scanner Lock Switch. If the message <Install the print head and set the ink tank. > appears, go to 6 . 2 Remove the orange protective cap from the Print Head and discard it. Do not touch the Print Head nozzles and the electrical contacts. 2 Twist off and discard the orange protective cap located on the bottom of the ink tank. Protective Cap Do not press! IMPORTANT · Make sure to unlock it before turning the machine on. · Before transporting the machine, always lock the Scanning Unit (Printer Cover) by moving the Scanner Lock Switch towards the lock mark. 6 Press the Open button to open the Paper Output Tray. [. . . ] 7 When the Printer Connection screen appears, ensure that the machine is connected to the computer with the USB cable, then turn the machine ON. The software will begin identifying the printer port being used. IMPORTANT If you cannot proceed to the next procedure after three minuets, refer to "Troubleshooting" instructions in the User's Guide. · A printer cable is not included. You must purchase a USB cable (less than 10 ft. /3 m) to connect your machine to a computer. · The screens below refer to Windows XP Service Pack 2 installation. · For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing. · Before installing the driver, disable all anti-virus programs and automatically loading programs. · If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this version before installing the new version. For instructions on uninstallation, see the guides for that version of MultiPASS Suite. · A printer cable is not included. You must purchase a USB cable (less than 10 ft. /3 m) to connect your machine to a computer. · Before installing the driver, disable all anti-virus programs and automatically loading programs. 7 When the list of applications to install appears, verify the contents, click [Install], then follow the instructions on the screen. Move the cursor over items to display explanations of each application below. 8 Read the License Agreement, then click [Yes]. 10 When the Installation completed successfully screen appears, click [Restart]. US Only When the Registration Screen appears, follow on screen instructions to register your product. You will need you product serial number, which is located on the inside of the machine. Refer to Step 1- 8 . 1 Connect the end of the USB cable to the computer, the other to the machine. Make sure the machine is turned ON. 1 Turn OFF the machine. 1. Be sure [COPY] stops flashing and all the lamps on the Operation Panel are off. 2 Turn the computer on and start Windows. IMPORTANT If you see the Found New Hardware Wizard, turn off the machine. [. . . ] Select [Custom Install] in order to choose the options you would like to install. Part no. Windows is a trademark of Microsoft Corporation, registered in the United States and other countries. [. . . ]