User manual CANON PIXMA MP150 annexe 1

[. . . ] User's Guide ENG QT7-0059-V02 Getting Help from Canon Help Us Help You Better. Before you contact Canon, please record the following information. Serial Number (located inside the machine): Model Number (located on the front of the machine): Machine Driver CD-ROM number (located on the CD-ROM): Purchase Date: Customer Technical Support Sequence* 1. Internet - www. canontechsupport. com For quick and comprehensive self-help in an intuitively guided interactive troubleshooting environment, the place to start is our helpful tech support web site. In addition, the latest driver downloads, answers to frequently asked questions, product information, and "where to buy" instructions are found here. 2. [. . . ] Some PictBridge compliant devices display the Layout option; 2-up, 4up, 9-up, and 16-up. If there are no options on the PictBridge compliant device that correspond to 2-up, 4up, 9-up, or 16-up, printing on stickers is not possible. When you are using Photo Stickers (PS-101), do not set "Borderless Printing" in "Layout" settings. About "Image optimize" When "Default setting" (selections based on the machine setting) is selected, the machine operates based on the "IMAGE ENHANCEMENT" settings mode using the controls of the machine. If you use a Canon PictBridge-compliant device, you can select "VIVID", "NR", "VIVID+NR" or "FACE". (Note that these options cannot be selected for some models. ) Note When "VIVID" is selected, the green and blue portions of photos are printed more vividly. When "NR" (Noise Reduction) is selected, noise in blue portions, such as the sky, and dark portions is removed. When "VIVID+NR" is selected, functions of both "VIVID" and "NR" are performed. When "FACE" is selected, a darkened face on the photo taken against the light is brightened. About "Date/File No. print" By default, "Off" is selected for this machine. If you select an image which has had the shooting date embedded in it using a camera with the print mode, select "Off" for this function. If you select "Date", "File No. ", or "Both", the date and/or file number will be printed over the embedded date (MP170). Note Never disconnect the USB cable during printing. When disconnecting the USB cable between the device and machine, follow the instructions given in the instruction manual of the device. Controls of the device cannot be used for the following: ­ Print quality setting ­ Machine maintenance For the device operation method and troubleshooting, refer to your digital device's manual. Chapter 7 Printing Photographs Directly From A Digital Camera 63 Printing Photographs Directly From A Canon "Bubble Jet Direct" Compatible Digital Camera Media Types For Digital Cameras When you connect a digital camera, you can use the following media: Digital Camera Setting Card #1 Card #2 Media Type Photo Paper Pro 4" x 6"/101. 6 x 152. 4 mm Photo Paper Plus Glossy 4" x 6"/101. 6 x 152. 4 mm Photo Paper Plus Semi-gloss 4" x 6"/101. 6 x 152. 4 mm Glossy Photo Paper 4" x 6"/101. 6 x 152. 4 mm Card #3 LTR Photo Paper Plus Glossy 5" x 7"/127. 0 x 177. 8 mm Photo Paper Pro Letter size Photo Paper Plus Glossy Letter size Photo Paper Plus Semi-gloss Letter size Glossy Photo Paper Letter size A4 Photo Paper Pro A4 size Photo Paper Plus Glossy A4 size Photo Paper Plus Semi-gloss A4 size Glossy Photo Paper A4 size Note For the digital camera operation method and troubleshooting, refer to your digital camera's manual. By operating the digital camera, you can make the following prints: ­ You can make a standard print from the photo displayed in the single display mode or in the index display mode. ­ You can print a specified numbers of photos, or make an index print by editing the DPOF. ­ For photos taken with an ExifPrint-compatible digital camera, the Photo Optimizer PRO function can be used. ­ If date printing is set from the digital camera, the date when the photograph was taken is to be printed (excluding on index prints). ­ Photos will be scaled automatically according to the image size set on the digital camera and the size of the media set on the machine. Digital cameras do not support the following functions: ­ Print quality setting ­ Printer maintenance Index printing can only be specified for images that were taken with a camera compatible with the Design rule for Camera File system (Exif 2. 21 compliant). 64 Printing Photographs Directly From A Digital Camera Chapter 7 Chapter 8 Changing The Machine Settings (MP170) Changing The Settings This section describes the procedure to change the settings in the <SYSTEM SETTINGS> menu, taking the steps to specify <EXTENDED AMOUNT> as an example. 1 2 3 4 Press [ON/OFF] to turn ON the machine. (See page 14) Press [Menu] repeatedly until <SYSTEM SETTINGS> appears. Use [ Use [ ] or [ ] or [ ] to select <PRINT SETTINGS>, then press [OK]. ] to select <EXTENDED AMOUNT>, then press [OK]. EXTENDED AMOUNT SMALL 5 Use [ ] or [ ] to select <SMALL> or <LARGE>, then press [OK]. Depending on the functions you use, some setting items cannot be specified in combination. Note PRINT SETTINGS QUIET MODE Use this function if you want to reduce the operation noise, such as when printing at night: ON/ OFF Important The printing speed may be reduced compared to when this setting is set to <OFF>. [. . . ] Since the defective product becomes the property of Canon USA at the time of the exchange, the defective product must be returned in the shipping materials provided. If the defective product is not returned, as directed, you will be responsible for the value of the replacement product, for which Canon USA may invoice you. This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. ** InstantExchange warranty service is subject to the availability of refurbished or new replacement units. [. . . ]