User manual CANON PIXMA IP4200 Easy Setup Instructions

[. . . ] NOTE: · To avoid spilling ink, never press on the sides of an ink tank. · Do not touch the open ink port once the protective cap is removed, as this may prevent the ink from being ejected properly. Protective Cap computer, the other to the appropriate USB port on the printer. NOTE: The iP4200 Photo Printer is equipped with USB 2. 0 Hi-Speed port. [. . . ] Close and reopen the top cover to return the holder to the center. Continue with Step 6 on side two. 6 s ow nd Wi Windows® Printer Driver Installation and Print Head Alignment 6 Macintosh® Printer Driver Installation and Print Head Alignment 7 Cassette Loading 7 When the Printer Connection screen appears, h os int c Ma NOTE: · Use Mac® OS X v. 10. 2. 1 to 10. 3. x. · Before installing the driver, disable all anti-virus programs and automatically loading programs. 1 Turn on your Mac and your printer and insert 8 Start the print head alignment procedure. NOTE: The screens below refer to Windows XP Service Pack 2 installation. Screens may differ depending on the operating system you are using. 1 Be sure to TURN THE PRINTER OFF before ensure that the printer is connected to the computer with the USB cable, then TURN THE PRINTER ON. The software will begin identifying the printer port being used. You can load paper in both the auto sheet feeder and cassette. 1 Pull out the cassette from the bottom of the a. Doubleclick the Utilities folder, then the Printer Setup Utility (Print Center when using Mac OS X v. 10. 2. x) icon. When the Printer List screen appears, select iP4200, then click Utility (Configure when using Mac OS X v. 10. 2. x) icon. printer. Cassette continuing. 2 Turn on the computer and start Windows. NOTE: · For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing. · Before installing the driver, disable all anti-virus programs and automatically loading programs. Then proceed from step 3 to install the printer driver. the Setup Software & User's Guide CD-ROM. If the CD-ROM folder does not open automatically, double-click the on the desktop. IMPORTANT: If your computer cannot detect a printer port, click Help and refer to the online instructions. NOTE: Log on as an Administrator before continuing. 2 Double-click the Setup icon. If a message asking for your confirmation to restart your computer appears, click OK. The system is restarted automatically. 8 When the Print Head Alignment screen If the printer is not displayed on the Printer List, click Add to add the printer. Select iP4200 and click Maintenance. Cover 2 Remove the cover of the cassette. [. . . ] For additional information visit the electronic User's Guide. verify the contents, click Install, then follow the instructions on the screen. Move the cursor over items to display explanations of each application below. 6 Read the License Agreement and click Yes. screen appears, click Restart. If a message asking for your confirmation to restart your computer appears, click OK. [. . . ]