User manual CANON PIXMA MP750

[. . . ] See the rear side of this sheet for details. 5 Install the ink tanks. 1 Prepare the ink tanks. Remove the orange-colored protective film. Remove the protective cap and discard it. 1 Unpack and install the machine. Check the package contents. · Machine · Power cord · Print head · Telephone line Do not touch! 2 Insert the ink tanks. Click MP780 · Ink tanks Black BCI-3eBK MP750 Black Cyan Magenta Yellow BCI-6BK BCI-6C BCI-6M BCI-6Y Push it in until locks into place. Good example · Easy Setup Instructions · Quick Start Guide · Setup CD-ROM The Setup CD-ROM contains the MP Drivers, as well as the User's Guide, Software Guide and Photo Application Guide in electronic format. [. . . ] ALIGN PRINT HEAD PRESS [OK] If this message does not appear after closing the Scanning Unit, see "Aligning The Print Head Automatically" in the Quick Start Guide. IMPORTANT Be sure to hold the Scanning Unit firmly with one hand. Pull the Scanning Unit Lever. 2 Open the two Inner Covers. 3 Raise the lock lever. Touch only the lock lever!If the printed pattern matches the illustration, print head alignment is complete. (2) The Print Head Holder moves to the center. (3) Install the print head here. (1) Open the two Inner Covers. You can change the language displayed on the LCD. For details, see "Selecting The Language For The LCD" in the Quick Start Guide. You have completed installation and alignment. 4 Prepare the print head. 5 Insert the print head. (2) Push back. If you are connecting the machine to a computer for use, see the rear side of this sheet for instructions on installing the software. Do not touch!Remove the protective cap and discard it. © 2004 Canon U. S. A. , Inc. , Canon and BCI are registered trademarks and PIXMA is a trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. HT7-0029-000-V. 1. 0 xx2004A © CANON INC. 2004 PRINTED IN CHINA Install the software. The following software programs are included on the Setup CD-ROM: Select Easy Install in order to install the application software, electronic manual and MP drivers. Select Custom Install in order to choose the options you would like to install. This sheet explains Easy Install Only. IMPORTANT · If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this version before installing the new version. For instructions on uninstallation, see the guides for that version of MultiPASS Suite. · Close any open software applications, including virus checkers, prior to installing the software. On-screen Manual Easy-PhotoPrint MP Drivers ScanSoft OmniPage SE MP Navigator IMPORTANT · Do not connect the machine to Mac OS 9 or Mac OS X Classic environments since they are not supported. [. . . ] Click Click 4 Click [Restart] to restart your computer. Click Click Click 4 Click [Exit]. · If prompted to, restart your computer. Click [MP780 FAX] is shown in the Name list, but you cannot add [MP780 FAX]. You can fax the document with the current print settings applied to it using the computer's internal modem. [. . . ]